Quick Answer: This graduated Measuring Cylinder has a ground-glass neck paired with a matching interchangeable stopper, giving a tight glass-on-glass seal for mixing, shaking or short-term storage of a sample without evaporation loss or contamination. It differs from LabEquip’s screw-cap and open-top measuring cylinders, which use different closure methods for different working needs.
Product Description
Like any measuring cylinder, this instrument is used to measure and dispense liquid volumes with a graduated scale printed along its length. What sets this version apart is its ground-glass stopper: the cylinder’s neck and the stopper are precision-ground to fit together, so once seated the stopper forms a secure seal. This makes the cylinder suitable not just for measuring, but for capping and gently inverting or shaking a sample to mix it, without needing a separate stoppered container.
What Makes This Instrument Distinct
LabEquip offers several measuring cylinder variants, and the closure type is one of the main differences between them. This stoppered version uses a ground-glass joint, which typically gives a tighter, more chemical-resistant seal than a screw cap and is well suited to mixing or brief sealed storage. Our screw-cap measuring cylinder instead uses a threaded cap, which is generally faster to open and close repeatedly and is a familiar everyday closure for routine dispensing work. Choosing between them depends on whether a tight mixing seal (this stoppered version) or quick repeated access (the screw-cap version) matters more for your application.
Specifications
| Attribute | Detail |
|---|---|
| Instrument Type | Graduated measuring cylinder with ground-glass stopper |
| Body Material | Glass |
| Closure Type | Interchangeable ground-glass stopper |
| Typical Use | Volumetric measurement, sample mixing, short-term sealed storage |
| Exact Capacity & Graduation Interval | Confirm with our sales team for your required size |
Care & Maintenance
- Rinse thoroughly after use and dry before storage to prevent residue building up on the graduated scale or inside the ground-glass joint.
- Keep the stopper matched to its own cylinder; ground-glass joints are typically fitted as a pair and may not seal properly if swapped between cylinders.
- Avoid gripping the stopper tightly while twisting to remove it if it sticks – a light rocking motion is safer for both the glass and the joint’s seal.
- Store upright, ideally with the stopper lightly seated but not forced, and protected from impact.
Why Choose LabEquip
Explore related instruments:
Frequently Asked Questions
What is the ground-glass stopper for?
It forms a tight glass-on-glass seal at the cylinder’s neck, allowing the cylinder to be capped for mixing, shaking or short-term sealed storage without evaporation or contamination.
How is this different from the screw-cap measuring cylinder?
The ground-glass stopper generally gives a tighter, more chemical-resistant seal for mixing, while a screw cap is faster to open and close for routine repeated dispensing.
Can I swap the stopper with another cylinder?
Ground-glass stoppers are typically ground to fit their own cylinder as a matched pair, so swapping stoppers between cylinders may not give a proper seal.
What capacity and graduation interval does this cylinder have?
Exact capacity and graduation intervals vary by size; please confirm your requirement with our sales team.
Is this cylinder suitable for mixing samples?
Yes, the ground-glass stopper allows the cylinder to be sealed for gentle inversion or shaking to mix a sample.
How should I care for the ground-glass joint?
Keep it clean and dry, avoid forcing a stuck stopper, and store the stopper with its matching cylinder to preserve the seal.
Last Updated: September 2026










Reviews
There are no reviews yet.