Search

In Stock

Lid With Stirrer

Couvercle avec agitateur, Integrated Manual Agitator. Enables student mastery of thermal equilibrium states, supporting Analyze-level objectives in Thermodynamics and Enthalpy modules.

Precision-Molded Thermometer Port Facilitates high-fidelity data acquisition of temperature shifts, advancing students toward the Evaluate stage of experimental error analysis.

Low-Thermal Conductivity Barrier minimizes parasitic heat loss to the ambient environment, allowing students to apply specific heat capacity formulas with verified empirical accuracy.

₹1,029.00

Quick Answer: The calorimeter lid with stirrer is a cover for a calorimeter vessel with a built-in stirrer passing through it. It reduces heat lost from the liquid surface and lets the liquid be mixed without opening the vessel, so temperature readings during heat experiments are more reliable.

What the Lid Prevents

An open calorimeter loses heat from its surface in two ways that are easy to underestimate. Warm air above the water rises and is replaced by cooler air, carrying heat away by convection. Water also evaporates, and every gram that escapes takes its latent heat of vaporisation with it, a large amount of energy compared with the small temperature changes being measured. A close-fitting lid traps a still, humid layer of air and cuts both losses sharply.

The lid also shields the water from draughts and from the radiant heat of nearby lamps or burners, which can otherwise warm one side of the vessel.

Why Stirring Matters

Without stirring, warm water collects at the top and cooler water sinks, and in an ice or metal-sample experiment the water next to the sample differs from the rest. A thermometer in one spot then reads a temperature that is not the average. Gentle up-and-down strokes of the stirrer mix the liquid so the reading represents the whole volume, and the final equilibrium temperature is reached sooner.

Because the stirrer passes through the lid, mixing can continue throughout the measurement without lifting the cover. Stirring should be steady and moderate, since vigorous stirring adds a little mechanical energy of its own and can splash water onto the lid. Lids of this kind usually have openings for a thermometer and for heater or resistor leads, and the fit to a particular vessel should be checked before ordering.

Where It Is Used

  • Covering a calorimeter during method-of-mixtures experiments
  • Electrical heating practicals with leads passing through the lid
  • Latent heat of fusion experiments where steady mixing speeds up melting
  • Upgrading open calorimeter cups to cut evaporation losses

Specifications

Product Calorimeter lid with integrated stirrer
Purpose Reduces evaporation, convection and draught losses; mixes the liquid
Used with Calorimeter vessel, thermometer, and an immersion heater or resistor where needed
Typical experiments Specific heat capacity, latent heat, electrical heating
Diameter, material and openings Confirm at enquiry

Care & Handling

  • Check that the lid fits the vessel snugly; a loose lid lets warm, moist air escape
  • Wipe condensation from the underside after use and let the parts dry before storage
  • Move the stirrer gently so it does not knock the thermometer bulb or the resistor
  • Do not use the stirrer as a lever to lift samples out of the liquid

Why Choose LabEquip

Teachers often order this lid to upgrade open calorimeter cups already in the laboratory, because it improves results without replacing the vessels. It suits the simplified calorimeter and the Dewar flask calorimeter; contact LabEquip with the vessel size to check the fit.

Frequently Asked Questions

How much heat does a lid really save?

Much of the heat lost from an open calorimeter leaves through the liquid surface, by evaporation and convection. Covering it removes a large part of that loss, which is often the simplest improvement a class can make.

Why does evaporation cause such a large error?

Each gram of water that evaporates carries away its latent heat of vaporisation, which is large compared with the heat involved in warming water by a few degrees. Even slight evaporation therefore removes a noticeable share of the energy.

How should the stirrer be used?

Move it gently up and down at a steady rate throughout the measurement. This mixes warmer and cooler layers so the thermometer shows the average temperature, without adding significant energy.

Can vigorous stirring affect the result?

Yes, slightly. Stirring does mechanical work on the water, which becomes heat, and fast strokes can splash water onto the lid where it cools. Steady, moderate stirring keeps both effects negligible.

Will the lid fit my existing calorimeter?

That depends on the vessel’s diameter and rim. Measure the inside diameter of the vessel and confirm at enquiry that the lid matches it before ordering.

Why is the stirrer built into the lid?

So the liquid can be mixed without lifting the cover. Opening the lid to stir would release warm, moist air and undo much of the benefit of covering the vessel.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)