Search

In Stock

Hooke’s Law Apparatus

Anti-Parallax Mirror Scale: Equipped with a 120mm adjustable vertical scale and an integrated mirror back to ensure precise pointer alignment and eliminate reading optical errors during elongation measurements.

Calibrated Load Assembly: Includes a heavy-duty steel support stand, a high-tensile test spring, and a 50g mass hanger compatible with standard slotted weights for controlled, incremental force application.

$10.04

Quick Answer: The Hooke’s Law Apparatus, named after the English scientist Robert Hooke, is a stand-mounted set-up in which a spring hangs beside a scale with a pointer, so that its extension can be measured as known masses are added. It is used to verify that extension is proportional to load and to find the spring constant.

Load, Extension and the Spring Constant

Hooke’s law states that, within the elastic limit, the extension of a spring is proportional to the force stretching it: F = kx, where k is the spring constant. In the apparatus the spring hangs from a rigid support, a pointer at its lower end moves over a vertical scale, and masses are added to a hanger in equal steps. Each new pointer reading minus the unloaded reading gives the extension.

Plotting load against extension gives a straight line through the origin whose gradient is k. Taking readings while unloading as well as loading shows whether the spring returns to its original length; if it does not, the elastic limit has been passed. Loading further makes the line curve, which marks where the law stops applying.

As mechanics lab equipment the same set-up serves for springs in series and in parallel and for the period of a mass bouncing on the spring, T = 2π√(m/k), timed with a digital stop watch. The parts supplied, the spring stiffness and the scale length are not stated in the listing title.

Specifications

Type Hooke’s law apparatus: spring, pointer and scale on a support
Measures Extension of a spring under known loads
Relationship F = kx within the elastic limit
Loads Masses added to a hanger in equal steps
Parts supplied, spring and scale details Confirm at enquiry

Applications

  • Verifying Hooke’s law from a graph of load against extension
  • Finding the spring constant from the gradient
  • Locating the elastic limit by comparing loading and unloading readings
  • Timing oscillations of a mass on the spring to find k a second way
  • Comparing springs joined in series and in parallel

Care & Handling

  • Lower each mass onto the hanger by hand rather than dropping it.
  • Do not load the spring far beyond the range needed, or it will be permanently stretched.
  • Read the pointer with the eye level with it to avoid parallax.
  • Store the spring unloaded and away from damp so that it does not rust.

Why Choose LabEquip

Middle and senior secondary physics teachers buy this apparatus because the Hooke’s law practical is one of the first experiments in which students plot a graph and extract a constant from its gradient. LabEquip lists it in Physics Equipments; ask about the parts supplied through our contact page.

Frequently Asked Questions

Can two springs be tested in series or in parallel?

Yes, if a second similar spring is available. Two springs hung one below the other stretch more for the same load, so the pair has a lower spring constant, while two springs side by side share the load and stretch less, giving a higher one.

How is the spring constant found?

Plot the load in newtons against the extension in metres. The gradient of the straight part of the graph is the spring constant in newtons per metre. A steeper line means a stiffer spring.

What is the elastic limit?

It is the largest load the spring can take and still return to its original length when unloaded. Beyond it the spring is permanently stretched, and the readings taken while unloading no longer return to the starting value.

How can parallax error be avoided?

Bring your eye level with the pointer before reading the scale, or use a scale with a mirror strip and line up the pointer with its reflection. Read the same edge of the pointer every time.

Can the apparatus be used for oscillation experiments?

Yes. Pull the loaded spring down slightly and release it, then time several oscillations. The period increases with the mass, and a graph of period squared against mass gives the spring constant independently.

Why should masses be added gently?

A dropped mass makes the spring overshoot and can stretch it beyond its elastic limit. Lower each mass by hand and wait for the pointer to settle before reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)