Search

In Stock

ELECTROMAGNET

Copper coil winding with an iron core produces strong, uniform magnetic fields

Insulated terminals and a table mounting base for safe and repeatable laboratory use

$4.74

Quick Answer: The Electromagnet is a coil of insulated wire wound on an iron core that becomes a magnet when current flows and loses most of its magnetism when the current stops. As a teaching electromagnet it is used in physics practicals on the magnetic effect of a current and on the factors that control magnetic strength.

How a Current Makes a Magnet

Every current produces a magnetic field around it. Winding the wire into a coil adds the fields of all the turns together, so the coil behaves like a bar magnet with a north pole at one end and a south pole at the other. Placing a soft-iron core inside multiplies the effect many times, because the iron’s own magnetic domains line up with the coil’s field and add to it. When the current is switched off, soft iron loses almost all of that alignment, which is what makes an electromagnet useful: it can be turned on and off.

The strength depends on three things students can test: the current in the coil, the number of turns, and the material of the core. Doubling the turns or raising the current increases the field, up to the point where the iron is saturated and can be magnetised no further. The form of this electromagnet, whether a straight bar, a U-shape or a coil on a stand, should be confirmed when ordering.

Investigations

  • Investigating how current affects the strength of an electromagnet
  • Finding the poles with a plotting compass and checking them with the right-hand grip rule
  • Comparing soft-iron, steel and air cores
  • Explaining relays, electric bells, lifting magnets and door locks; the electric bell shows one in action

Running a Fair Strength Test

The classic practical counts how many paper clips, or how many small slotted masses, the electromagnet can hold as the current is changed. A rheostat in series sets the current and an ammeter measures it. To keep the test fair, the same clips are used each time, they are lifted from the same position, and the current is switched off between readings so the coil does not warm up and change its resistance. Plotting load against current shows a rise that levels off as the core approaches saturation.

Specifications

Type Coil on a soft-iron core for school magnetism practicals
Principle Magnetic effect of an electric current
Variables investigated Current, number of turns, core material
Used with Low-voltage DC supply, rheostat, ammeter, plotting compass
Form, number of turns and current rating Confirm at enquiry

Care & Handling

  • Use a low-voltage DC supply and switch the teaching electromagnet off between readings; the coil heats up if left on.
  • Do not exceed the coil’s current rating; warm insulation and a smell of hot varnish mean the current is too high.
  • Keep watches, phones and magnetic-stripe cards away from the core when the current is on.
  • Wind any loose leads neatly and store the electromagnet dry so its insulation stays sound.

Why Choose LabEquip

Schools buy electromagnets so that groups can run the strength investigation side by side and compare results. LabEquip lists this electromagnet in its physics lab equipment range; a current carrying solenoid shows the same field without an iron core. Ask about the form and current rating via our contact page.

Frequently Asked Questions

What makes an electromagnet stronger?

More current, more turns of wire and a core of a magnetic material such as soft iron. Each increases the magnetic field, until the iron core becomes saturated and cannot be magnetised further.

What happens if a steel core is used instead of soft iron?

Steel keeps much of its magnetism after the current is switched off, so it becomes a permanent magnet. That is useful for making magnets, but not for an electromagnet that must release its load when switched off.

How can students find which end is the north pole?

Use a plotting compass at each end, or apply the right-hand grip rule: curl the fingers of the right hand in the direction of the current round the coil, and the thumb points to the north pole.

Why does the coil get warm?

The wire has resistance, so the current heats it. The heating increases with the square of the current, which is why readings should be taken quickly and the supply switched off between them.

How is the lifting strength measured fairly?

Lift the same kind of paper clips or small masses from the same position each time, change only the current or the number of turns, and repeat each reading. Switching off between readings keeps the coil at a steady temperature.

Where are electromagnets used in everyday life?

In relays, electric bells, door locks, loudspeakers, scrap-yard lifting magnets, motors and generators. All of them rely on a magnetic field that can be switched on, off or reversed by controlling a current.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)