Search

In Stock

Electrode Holders

Porte-électrodes Engineered with a tiered slot architecture that accommodates both blade and rod electrode geometries (up to 8mm), ensuring rigid vertical alignment and reproducible inter-electrode distance for precise voltammetric measurements.

High-Dielectric Acid-Resistant Polymer Manufactured from chemically inert, non-conductive materials that prevent parasitic current leakage and resist degradation from concentrated electrolytes, maintaining systemic integrity during high-amperage electrolysis cycles.

₹245.00

Quick Answer: Electrode holders are small insulating clips that sit on the rim of a beaker and hold a plate or rod electrode upright in the solution, with a screw terminal for the lead, as pictured. Using an electrode holder on each side of the beaker fixes the spacing of the electrodes and keeps the connection above the liquid.

Why Hold the Electrodes

In cell and electrolysis practicals, results depend on the electrodes staying still. If a plate slides down into the solution or leans across the beaker, the area in contact and the distance between the electrodes change, and so do the current and the cell voltage. An electrode holder clamps each electrode at a fixed depth and position, so repeat runs are comparable and students do not have to hold anything while the reaction runs.

The holder body is plastic, so the electrode is insulated from anything else touching the beaker, and the metal terminal pictured on top takes a lead or plug. Keeping the electrical connection clear of the liquid avoids the connector itself becoming part of the circuit.

Setting Up a Cell

Clip one holder on each side of the beaker, slide a plate or rod into each and tighten it at the depth you want. Connect the leads to the terminals and to the voltmeter or power supply. For a fair comparison between metals, keep the same depth and spacing for every pair, changing only the metal being tested.

Specifications

Product Electrode holders
Shown in photograph Two white plastic clips with metal rod and screw terminal
Mounting On the rim of a beaker
Holds Plate or rod electrodes
Used with Plate electrodes, graphite rods, beakers, leads
Rim and electrode size range Confirm at enquiry

Where Holders Are Used

  • Holding zinc and copper plates in simple cell experiments
  • Fixing electrode spacing in copper plating and refining practicals
  • Holding graphite rods for electrolysis of solutions in a beaker
  • Supporting electrodes for conductivity comparisons of solutions

Care & Handling

  • Rinse holders after use to remove electrolyte from the clip and terminal
  • Do not overtighten the screw on thin plates or graphite rods, which can crack
  • Keep the terminal dry and above the solution level
  • Store holders in pairs with their screws so parts are not lost

Why Choose LabEquip

Teachers order holders in pairs so that every group can set electrodes at the same depth and spacing. LabEquip supplies them with plate electrodes and other physics lab equipment; contact LabEquip to check fit with your beakers.

Frequently Asked Questions

What size of beaker do the holders fit?

They clip over the rim of common laboratory beakers. The range of rim thickness and electrode size they accept can be confirmed at enquiry.

Can they hold rods as well as plates?

Yes. The clamp grips flat plates and round rods, such as graphite electrodes, at the depth you choose.

Why does the electrode spacing matter?

The resistance of the solution between the electrodes depends on their distance apart, so changing the spacing changes the current. Fixed spacing keeps runs comparable.

Are the holders insulating?

The body is plastic, which insulates the electrode from the beaker and from other electrodes. Only the terminal and the electrode carry current.

Why keep the terminal out of the solution?

If the metal terminal touches the electrolyte, it joins the cell as an extra electrode and can react or plate, which upsets the results.

How should holders be cleaned?

Rinse them in clean water after use, dry the terminal and screw, and avoid strong solvents that could damage the plastic.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)