Search

In Stock

Educational Electricity Meter

Compteur électrique didactique Features a high-resolution digital display providing synchronized data on active power (W), cumulative energy (kWh), and line frequency (Hz) with Class 1.0 measurement accuracy.

Standardized Didactic Interface Engineered with integrated 4mm safety shrouded sockets and a reinforced high-dielectric housing, ensuring tool-free, secure connectivity for systemic laboratory power circuit analysis and energy-balancing experiments.

₹2,305.00

Quick Answer: The Educational Electricity Meter is an energy meter made for teaching, used to measure how much electrical energy a connected appliance or circuit uses over time. With an educational electricity meter students see the link between power, time and the kilowatt-hour on a household bill, and compare the energy used by different devices.

Energy, Power and the Kilowatt-Hour

Electrical energy transferred equals power multiplied by time. The joule is the scientific unit, but bills use the kilowatt-hour: the energy transferred by a one-kilowatt appliance running for one hour, which is 3.6 million joules. A meter adds up the energy used continuously, so its reading climbs quickly with a heater and slowly with an LED lamp, and the class can see the difference rather than only calculate it.

A teaching meter is designed to be read and discussed in class. Depending on the model it may show accumulated energy alone or also present power, voltage and current, and it may be meant for mains appliances or for a low-voltage circuit. These features, and how the meter is connected, should be confirmed before ordering so that it fits the lessons and the safety arrangements planned.

Lessons Built Around the Meter

A typical lesson runs two appliances of different power for the same time and compares the readings, then runs one of them for twice as long, with students predicting each result from power multiplied by time before looking. Converting readings into cost at a given tariff connects the physics to household budgets, and comparing a filament lamp with an LED lamp of similar brightness, for example in an E27 lamp socket, shows why efficiency matters. On a low-voltage circuit, older students can check the meter against separate voltmeter and ammeter readings for a resistive load, using P = VI.

What Students Measure

  • The energy used by lamps, heaters and small appliances
  • Running costs from kilowatt-hours and a tariff
  • Filament and LED lamps compared for the same light output
  • Checks of P = VI and E = Pt against independent meter readings

Specifications

Type Electricity (energy) meter for teaching
Measures Electrical energy used over time
Unit Kilowatt-hour; some models show other quantities
Use Energy, power and efficiency lessons
Display, connection method and voltage rating Confirm at enquiry

Care & Handling

  • Connect the educational electricity meter only as its instructions describe, and have any mains connection made by a competent person.
  • Stay within the meter’s rated voltage and current, and switch off before connecting or disconnecting appliances.
  • Keep the meter dry and away from liquids, and do not open its case.
  • Supervise students closely whenever mains appliances are in use.

Why Choose LabEquip

Schools teaching energy and household electricity buy a meter so classes can measure rather than only calculate. It is part of our physics lab equipment range; tell us through the contact page whether you plan to use it with mains appliances or with low-voltage circuits.

Frequently Asked Questions

What is a kilowatt-hour?

It is the energy transferred by a device of one kilowatt power running for one hour, equal to 3.6 million joules. Household electricity is billed in kilowatt-hours, often called units.

How do I calculate the energy an appliance uses?

Multiply its power by the time it runs. A 2 kW heater running for 3 hours uses 6 kilowatt-hours. Multiplying by the tariff, the charge for each kilowatt-hour, gives the cost.

Why does the meter reading rise faster with a heater than with a lamp?

The reading rises at a rate equal to the power drawn. A heater draws far more power than a lamp, so it transfers energy faster and the accumulated reading climbs more quickly.

Can the meter be used with low-voltage circuits?

That depends on the model. Some teaching meters are designed for mains appliances and others for low-voltage circuits on the bench. Which kind this meter is should be confirmed at enquiry.

How can students check the meter’s reading?

Where the meter is used on a low-voltage circuit with a resistive load, measure the voltage and current separately, calculate the power as voltage times current and multiply by the running time. The result should agree closely with the energy the meter records.

Why do LED lamps save energy?

An LED lamp produces light directly from a semiconductor, while a filament lamp heats a wire until it glows and wastes most of its energy as heat. For the same light output the LED lamp draws far less power, so the meter records far less energy over the same time.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)