Search

In Stock

Decade Resistance Box

Precision Internal Circuitry: Utilizes high-stability non-inductively wound manganin wire resistors across multiple decade dials, ensuring a consistent accuracy of ±1% with minimal temperature coefficient drift.

Rugged Instructional Hardware: Enclosed in an electrostatic-shielded cabinet with high-quality rotary switches featuring low-resistance silver-plated contacts to ensure durable, noise-free operation during high-frequency laboratory use.

$18.27

Quick Answer: The Decade Resistance Box is a boxed set of resistors arranged in decades, so that a known resistance can be set digit by digit, usually with one rotary selector for each decade. It supplies adjustable, readable resistance for bridge, potentiometer and circuit practicals.

Setting Resistance Digit by Digit

In a decade resistance box the lowest selector sets the smallest step and each following selector works in steps ten times larger, with the chosen resistors connected in series inside the box. The value in circuit is read directly from the selector positions, much as a number is read from its digits, which is quicker and less error-prone than adding up the coils left unplugged on an older box.

Where the decades are set with rotary dials, as on most boxes of this type, there are no loose plugs to lose and no dirty plug sockets adding contact resistance. That suits practicals in which the resistance is changed many times: hunting for the balance point of a bridge, plotting current against resistance at constant voltage, or matching an unknown resistor by substitution.

The listing title does not state the resistance range, number of decades, tolerance or power rating, so check them against the currents your circuits will draw. The decade capacitance box pairs with this box for RC time-constant experiments.

Specifications

Type Decade resistance box
Selection Resistance set decade by decade, typically with rotary dials
Internal connection Selected resistors in series
Typical uses Bridges, potentiometers, substitution, RC circuits
Range, tolerance and power rating Confirm at enquiry

Applications

  • Known comparison resistance in Wheatstone bridge and metre bridge experiments
  • Series resistance in a potentiometer circuit or in converting a galvanometer to a voltmeter
  • Measuring an unknown resistance by substitution
  • Plotting current against resistance at constant voltage
  • Varying R in RC charging and discharging experiments

Care & Handling

  • Keep currents small; each resistor has a power limit.
  • Turn the dials firmly to a detent position; a dial left between positions can open the circuit.
  • Keep the box dry and away from heat sources.
  • Check a few settings against a reliable meter before measurement practicals.

Why Choose LabEquip

Senior school and college physics departments usually keep at least one decade box on each bench used for electricity practicals, because so many experiments need a known, adjustable resistance. LabEquip lists this box in Physics Equipments; ask about available ranges through our contact page.

Frequently Asked Questions

How do I read the value set on a decade resistance box?

Multiply each selector position by the step size marked beside it and add the results. With every decade on the panel this works like reading a number from left to right, from the largest decade down to the smallest.

What is the difference between a decade box and a plug-type resistance box?

A plug-type box adds a coil each time a brass plug is removed, so the value is the sum of the unplugged coils. A decade box sets each digit with a selector. Decade boxes are quicker to adjust; plug boxes are simple and very robust.

Why must the current through the box be kept small?

The power dissipated in a resistor rises with the square of the current, and each resistor has a limit. Too much current heats the resistors, shifts their values and can damage them. Add series resistance or lower the supply voltage when in doubt.

Can a decade resistance box replace a rheostat?

For small currents, where the exact value matters, yes. A rheostat is better for controlling larger currents smoothly, because its wire winding can dissipate more power, but its setting is not known accurately.

How is it used to measure an unknown resistance by substitution?

Note a reading, such as the current or a galvanometer deflection, with the unknown resistor in circuit. Replace it with the box and adjust the dials until the same reading returns. The dial setting then equals the unknown resistance.

How often should the box be checked?

Before important practical sessions, check a few settings with a reliable meter. A large disagreement points to a worn selector contact or a damaged resistor, which should be repaired before the box is used for measurement.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)