Search

In Stock

Cup Anemometer with Digital Display

High-Sensitivity Cup Rotor Assembly: Converts airflow into stable electrical signals for accurate speed calculation.

Integrated Digital Display Module: Delivers instant, easy-to-read wind speed values for instructional and field applications.

$14.17

Quick Answer: The Cup Anemometer with Digital Display is a wind-speed meter whose cup rotor is sensed electronically as it turns, with the rotation rate converted into a numerical reading. It is used in school weather stations, environmental monitoring projects and physics lessons that link rotation rate to speed.

From Rotation to a Number

Inside the hub, a sensor detects each turn of the spindle. Some designs use a small magnet passing a reed switch or Hall-effect sensor, others an optical disc that interrupts a light beam, and some a miniature generator. Either way, the electronics measure how often the signal repeats and multiply that frequency by a calibration factor to give wind speed.

Because the conversion is done electronically, a digital meter can display speed in different units and may offer averaged or maximum readings, depending on the model; the functions of this unit should be checked before planning an investigation around them. The physics is the same as in any cup instrument: the open cups catch more of the wind than the rounded backs, so the rotor turns at a rate close to proportional to the wind speed.

Investigations

  • Logging wind speed at the same time each day for a school weather record
  • Comparing wind speed at different heights, or upwind and downwind of buildings
  • Studying wind chill alongside temperature readings
  • Siting a small wind turbine model or a school garden windbreak
  • Calibrating a home-made anemometer against a digital reading

Getting Representative Readings

Wind speed varies with height, shelter and time. For comparisons, hold or mount the instrument at the same height each time, well away from walls, and stand so your body does not block the wind reaching the cups. Take readings over a fixed period and record the average rather than a single number. Where the meter shows a maximum, that figure describes gusts, which matter for safety on structures and for comfort around tall buildings.

Specifications

Sensor Rotating cups with a rotation sensor in the hub
Readout Digital numerical display
Measures Wind speed
Power Electronic display needs a battery or other supply
Units, averaging or maximum functions and probe type Confirm at enquiry

Care & Handling

  • Remove the batteries if the anemometer will not be used for several weeks.
  • Shield the display unit from rain; the cups tolerate weather better than the electronics.
  • Keep fingers out of the rotor and do not spin it by hand to high speed.
  • Store it with the cups protected from crushing, since a bent cup unbalances the rotor and spoils the calibration.

Why Choose LabEquip

Schools running weather stations and environmental clubs often prefer a digital meter because students can enter values directly into a data table. LabEquip lists it in Physics Equipments, next to the analog-display cup anemometer for a simple dial readout. For quantities, send a note via the LabEquip contact page.

Frequently Asked Questions

How does the meter know how fast the cups are turning?

A sensor in the hub produces a signal once or several times per revolution. The electronics count the signals per second and convert that rotation rate to wind speed using a calibration factor.

Why is the reading not the same at two nearby spots?

Wind is turbulent, and small obstacles create local eddies and shelter, so readings a few metres apart can differ. Average over a period and keep the position consistent when comparing sites.

What is the difference between average and maximum wind speed?

Average speed describes the general wind over a period, which suits weather records. Maximum speed captures the strongest gust, which matters for wind loads on structures and for safety outdoors.

Can the digital anemometer be left outdoors permanently?

Only if it is designed for permanent mounting. A hand-held unit should be brought indoors after use, as rain and condensation damage electronics. For continuous records, a fixed weather station is more suitable.

Why does the display read zero in a light breeze?

The rotor needs a small minimum wind speed to overcome bearing friction and start turning. Below that starting speed the reading stays at zero even though the air is moving.

How can students check the calibration?

Compare it with a second anemometer held at the same height and position, or check both in front of a fan at several settings. Large differences suggest a damaged cup or a worn bearing.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)