Search

In Stock

Copper Calorimeter

High-Purity Spun Copper Vessel: Engineered with a polished interior surface to minimize radiative heat loss and maximize thermal sensitivity during rapid equilibrium phases.

Standardized Volumetric Geometry: Features a parallel-walled profile designed for seamless integration with universal insulating jackets and low-thermal-mass stirrers, ensuring minimal interference with experimental heat exchange calculations.

$5.19

Quick Answer: The Copper Calorimeter is a thin-walled copper vessel in which hot and cold substances are mixed so that the heat exchanged can be measured from temperature changes. A copper calorimeter is the basic container for specific heat and latent heat experiments in school and college physics.

Parts of a Calorimeter Arrangement

At its simplest the calorimeter is the copper cup itself. In use it is normally placed inside an outer container or jacket, resting on an insulating support so that it touches the outer wall as little as possible, and covered with a lid that has openings for a thermometer and a stirrer. The air layer between cup and jacket is a poor conductor, and the lid prevents warm air and vapour from carrying heat away from the surface of the liquid.

Copper is used because it conducts heat quickly, so the vessel follows the temperature of its contents almost at once, and because its specific heat capacity is low, about one tenth that of water. The vessel therefore takes only a small share of the heat in any exchange, and that share can be calculated and allowed for.

Specifications

Type Calorimeter vessel for the method of mixtures
Material Copper
Used with Outer jacket, lid, stirrer and thermometer
Principle Heat lost by hot bodies equals heat gained by cold bodies and the vessel
Capacity and items included in the set Confirm at enquiry

Calibrating the Calorimeter Before Use

Every calculation in calorimetry includes the heat taken up by the vessel and stirrer. The simplest way to find it is to weigh the empty vessel and multiply its mass by the specific heat capacity of copper. An experimental check is to put a known mass of cold water in the calorimeter, add a known mass of warm water, and compare the heat lost by the warm water with the heat gained by the cold water. The difference is the heat absorbed by the copper.

For accurate work a cooling correction is added. Temperatures are recorded for a few minutes after mixing, and the rate at which the mixture cools is used to estimate how much higher the final temperature would have been with no loss. Students who make this correction routinely get noticeably better agreement with accepted values.

Experiments in a Copper Vessel

  • Finding the specific heat capacity of a solid or a liquid by the method of mixtures
  • Measuring the specific latent heat of fusion of ice or of vaporisation of water
  • Measuring the energy given out by an immersion heater in electrical heating experiments
  • Teaching the principle of calorimetry and the idea of heat capacity

Care & Handling

  • Dry the calorimeter inside and out after every use to slow tarnishing.
  • Polish the outer surface occasionally; a bright surface loses less heat by radiation.
  • Do not heat the empty vessel directly in a flame, which discolours and may distort the thin wall.
  • Store the cup inside its jacket or a padded box so the rim is not dented.

Why Choose LabEquip

Physics laboratories in schools and colleges buy these calorimeters in class numbers, since most heat practicals start with one. LabEquip also offers the copper calorimetry instrument and several stirrer and enclosure versions within its physics equipment category. For class quantities or a particular arrangement, use the contact page.

Frequently Asked Questions

What does a copper calorimeter set usually consist of?

The core part is a thin copper cup. It is used inside an outer jacket or box with an insulating gap, together with a lid, a stirrer and a thermometer. Which of these come with a particular model is stated in the quotation.

How is the heat capacity of the calorimeter itself found?

Multiply the mass of the empty vessel and stirrer by the specific heat capacity of copper, or find it experimentally by mixing known masses of warm and cold water in the vessel and attributing the missing heat to the copper.

What is the cooling correction in calorimetry?

It is an allowance for heat lost to the room during an experiment. The temperature is recorded for some time after mixing, and the rate of cooling is used to estimate the extra rise that would have been seen without any loss.

Which liquids should not be put in this calorimeter?

Avoid acids, ammonia solutions and other liquids that attack copper, since they corrode the vessel and add heat of reaction to the measurement. Water, oils and similar neutral liquids are suitable.

Why is water usually the liquid in the calorimeter?

Water has a high, accurately known specific heat capacity, is cheap and safe, and changes temperature only slowly, so readings can be taken calmly. Its known value makes it the reference against which other substances are measured.

How accurate are results with a simple copper calorimeter?

With careful stirring, a lid and a cooling correction, students can usually get within a few per cent of accepted values. Most error comes from heat lost while transferring a hot body into the vessel and from slow thermometer reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)