Search

In Stock

Conductor, Spherical

High-Conductivity Surface Geometry: Features a precision-milled metal sphere with a seamless, mirror-polished finish to minimize unintended charge leakage and prevent localized corona discharge during high-voltage experiments.

Superior Dielectric Isolation: Mounted on a reinforced, high-resistivity insulating pillar and a heavy-duty weighted base, ensuring total electrical isolation and mechanical stability during sensitive electrostatic measurements.

$5.13

Quick Answer: The Conductor, Spherical is a metal sphere, normally mounted on an insulating stand, used in electrostatics to hold charge, to show charging by induction and to study how charge spreads over a conductor’s surface. A spherical conductor is the simplest shape on which charge distributes evenly.

Why the Sphere Is the Reference Shape

On an isolated sphere every point of the surface is equivalent, so charge spreads evenly and the surface charge density is the same everywhere. That makes the sphere the reference shape in electrostatics: outside it, the field is the same as if all the charge sat at the centre, E = Q/(4πε₀r²), and its potential is V = Q/(4πε₀R) for a sphere of radius R.

Compare it with a pear-shaped conductor, where charge crowds at the pointed end. On the sphere, sampling different points with a proof plane and an electroscope gives similar readings, while the pear shape gives a much larger reading at its point. Together the two shapes show that charge density is greatest where curvature is greatest, which is why lightning conductors and the combs inside a Van de Graaff generator are pointed.

Two identical spheres make a neat induction experiment. Stand them touching, bring a charged rod near one, separate them while the rod is still present, then remove the rod: each sphere is left with an equal and opposite charge, which the electroscope confirms.

Practical Work

  • Charging two touching spheres by induction and testing the sign on each
  • Comparing charge density on a sphere with that on a pear-shaped conductor
  • Storing charge for transfer to an electroscope or capacitor demonstration
  • Illustrating that an isolated sphere’s capacitance, C = 4πε₀R, grows with its radius

Specifications

Type Spherical conductor for electrostatics
Body Metal sphere
Support Insulating stand or handle
Charge distribution Uniform over the surface when isolated
Diameter, hollow or solid form and stand material Confirm at enquiry

Care & Handling

  • Hold the sphere by its insulating support; skin oil on the insulator is the main cause of charge leakage.
  • Avoid dents and scratches on the sphere, because any sharp ridge lets charge escape into the air.
  • Discharge the sphere with an earthed lead before and after each experiment.
  • Store in a dry cupboard, away from chemicals that tarnish metal surfaces.

Why Choose LabEquip

Schools and colleges buy spherical conductors in pairs or sets so that induction, sharing of charge and charge distribution can all be shown on one bench. LabEquip supplies them within its electrostatics range in Physics Equipments, and sets can be arranged through the contact page.

Frequently Asked Questions

Why is charge spread evenly on a sphere?

Every point on a sphere’s surface has the same curvature, so the mutual repulsion of the charges is balanced when they are evenly spaced. On other shapes, charge gathers where the surface curves most sharply.

How do I charge two spheres by induction?

Stand the spheres touching, bring a charged rod close to one, then separate the spheres while the rod is still near and finally remove the rod. The nearer sphere carries charge opposite to the rod and the farther one the same sign, in equal amounts.

Does the charge go inside a hollow sphere?

No. On a conductor in equilibrium the charge lies on the outer surface and the field inside is zero, whether the sphere is hollow or solid. A proof plane touched to the inside of an opened hollow conductor picks up no charge.

Why does a bigger sphere hold more charge at the same voltage?

An isolated sphere has capacitance C = 4πε₀R, proportional to its radius. A larger sphere therefore stores more charge for a given potential, which is why high-voltage terminals use large, smooth domes.

Why does the sphere sometimes lose its charge quickly?

Charge leaks through a damp or dirty insulator, through humid air and from any sharp edge or scratch. Clean, dry insulators and a dry room keep the charge for much longer.

What other apparatus is used with a spherical conductor?

A charge source such as a rubbed rod or an electrophorus, a proof plane for sampling, an electroscope to detect the charge and an earthing lead to discharge everything between experiments.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)