Quick Answer: The Circuit Board, Junior is a board for building simple electric circuits, intended for younger students meeting electricity for the first time. On a junior circuit board pupils connect cells, switches and lamps into complete, series and parallel circuits and learn how current flows by trying it.
Learning Electricity on a Junior Board
Loose wires and lamps that roll off the bench make first electricity lessons harder than they need to be. A circuit board fixes the parts in place so that attention goes to the circuit rather than the components. Pupils can trace a single path from the cell, through the switch and lamp and back again, and see straight away that the lamp lights only when the loop is complete.
From there the board supports the classic early investigations. Two lamps connected one after the other glow dimly and both go out if one is removed; connected side by side, they glow brightly and work independently. Leaving a gap in the circuit and bridging it with metal, plastic, pencil lead or wood turns the board into a tester for conductors and insulators.
The listing does not include a component list, so the exact parts, the connection method (sockets, terminals or clips) and the power source should be confirmed. For older classes moving on to meters, resistance and Ohm’s law, the senior circuit board is the follow-on item.
Activities
- Showing that a lamp lights only in a complete circuit and that a switch makes a gap
- Comparing lamps connected in series and in parallel
- Testing which materials conduct electricity
- Drawing circuit diagrams with standard symbols from a circuit that has just been built
- Simple fault finding: a loose connection, a flat cell or a failed lamp
Care & Handling
- Take the cells out after each lesson so that they cannot leak onto the board.
- Replace a failed lamp with one of the same voltage rating.
- Keep the board dry and wipe it with a barely damp cloth only.
- Coil and store connecting leads with the board so that each group’s set stays complete.
Specifications
| Type | Circuit board for introductory electricity |
| Level | Junior: upper primary and early secondary |
| Activities | Complete circuits, switches, series and parallel lamps, conductor testing |
| Power | Low-voltage cells |
| Components and connection method | Confirm at enquiry |
Why Choose LabEquip
Primary and middle-school science teachers buy junior circuit boards as class sets, one for each group. LabEquip lists this board in Physics Equipments, and the contact page is the quickest way to confirm the parts supplied.
Frequently Asked Questions
What age group is the junior circuit board for?
It is aimed at pupils meeting electric circuits for the first time, typically in upper primary and early secondary science. The ideas it covers are complete circuits, switches, series and parallel lamps, and conductors and insulators.
Why do two lamps in series glow dimly?
The cell’s voltage is shared between the two lamps, so each receives less than it would alone, and the current round the loop is smaller. In parallel each lamp receives the full voltage of the cell, so both glow brightly.
What happens if one lamp is removed?
In series the whole circuit breaks and every lamp goes out, which is why old strings of decorative lights failed together. In parallel the other lamp stays lit because it has its own path back to the cell.
Can the board test whether materials conduct?
Yes. Leave a gap in the circuit and bridge it with the test material. If the lamp lights, the material conducts. Metals and pencil graphite light it; plastic, wood, rubber and glass do not.
What power source should be used?
Ordinary low-voltage cells are the safe and usual choice for junior circuit work. Match the lamp rating to the number of cells so lamps are not overdriven, and never connect the board to a mains socket.
How does the junior board differ from the senior board?
The junior board covers basic circuit ideas with lamps and switches. The senior board is meant for higher classes, where circuits are measured as well as built, for example in Ohm’s law practicals.
Last Updated: October 2026










Reviews
There are no reviews yet.