Search

In Stock

Bicycle Pump

Pompe à vélo, High-Volume Displacement Cylinder Enables the technical Analysis of work-energy theorems and the physical relationship between manual force and internal pressure gradients.

Ruggedized Ergonomic Foot-Base Ensures stable, repeatable data acquisition during high-pressure trials, supporting student Evaluation of adiabatic heating during rapid compression cycles.

$2.76

Quick Answer: The bicycle pump is a hand-operated piston pump that pushes air through a valve into a tyre or any connected vessel. In the physics lab the bicycle pump pressurises bottles and apparatus and shows that compressing a gas warms it.

How a Hand Pump Moves Air

A flexible cup seal on the piston presses against the barrel on the push stroke and folds away on the return stroke, letting fresh air in behind it. On each push the air in the barrel is squeezed until its pressure is higher than that in the vessel, and only then does it flow out through the valve. The valve on the tyre or bottle stops it flowing back.

This explains why pumping gets harder as the pressure builds. To reach twice atmospheric pressure in a bottle, the air in the barrel has to be compressed to about half its original volume before any of it passes the valve, a direct application of Boyle’s law that students can feel in their arms.

Compression Warms the Gas

After vigorous pumping the end of the barrel near the outlet becomes warm. A little of that comes from friction at the seal, but most comes from the work done on the air: the compression is quick, the air has little time to lose energy, and its temperature rises. This is the same effect that heats the air in a diesel engine cylinder enough to ignite the fuel.

The reverse effect produces the cloud-in-a-bottle demonstration. A plastic bottle with a little water inside is sealed with a stopper carrying a valve, air is pumped in, and the stopper or valve is then released suddenly. The air expands, cools, and water vapour condenses into a visible mist that disappears again when the bottle is re-pressurised.

Applications

  • Cloud-in-a-bottle demonstration of cooling on expansion
  • Showing that rapid compression warms a gas
  • Pressurising a bottle while a gauge records the rise
  • Explaining Boyle’s law through the stroke getting harder

Specifications

Product Hand-operated piston air pump (bicycle pump)
Action Piston with cup seal pushes air through a valve into the connected vessel
Physics uses Pressurising bottles, inflating, compression-heating demonstrations
Pairs with Pressure gauge, bung with tyre-type valve, plastic bottles
Connector type and whether a gauge is fitted Confirm at enquiry

Care & Handling

  • Pressurise only plastic bottles or vessels made for pressure, never ordinary glassware
  • Wear eye protection whenever a bottle or bung is under pressure
  • Keep the piston seal in good condition and replace it if the pump stops building pressure
  • Keep dust and liquids out of the barrel

Why Choose LabEquip

Physics teachers keep a bicycle pump because it is robust, familiar to students and delivers more air than a syringe for bottle demonstrations. Read the rising pressure on the needle pressure gauge; contact LabEquip for supply, or browse more physics lab equipment.

Frequently Asked Questions

Why does the pump get warm when used quickly?

Pushing the piston does work on the air, and when compression is fast the air has little time to lose that energy, so its temperature rises. Friction at the seal adds a little extra warmth.

Why does pumping get harder as the pressure rises?

Air from the barrel only enters the vessel once it has been squeezed to a higher pressure than the air already there. At double atmospheric pressure the barrel air must first be compressed to about half its volume.

How is the cloud in a bottle made?

Put a little water in a plastic bottle, seal it with a stopper fitted with a valve, pump in some air and then release it suddenly. The expanding air cools, and water vapour condenses into a visible cloud.

Is it safe to pressurise glass apparatus with the pump?

No. Ordinary laboratory glassware is not made to hold internal pressure and can shatter. Use plastic bottles or vessels intended for pressure, keep pressures modest and wear eye protection.

Why does the pump stop building pressure after a while?

Usually the piston seal is worn or dry and air leaks past it on the push stroke, or the connector is not sealing on the valve. Re-seat the connector first, then check or replace the seal.

Which valve does the pump connect to?

The connector type can be confirmed at enquiry. For lab use, a bung fitted with a tyre-style valve lets the pump fill a bottle, and the valve holds the air when the pump is removed.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)