Quick Answer: A ballistic galvanometer is a moving-coil galvanometer with a heavy, lightly damped coil, used to measure the total charge carried by a brief pulse of current rather than a steady current. The first throw of the coil is proportional to the charge, so it is used for capacitance, high-resistance and magnetic-flux experiments.
Why a Ballistic Instrument Measures Charge
In an ordinary moving-coil galvanometer the coil turns while the current flows and settles at a steady deflection. The ballistic instrument is built differently: its coil has a large moment of inertia and very little damping. When a short pulse of current passes, such as the discharge of a capacitor, the pulse is over before the coil has moved appreciably. The coil receives an angular impulse proportional to the total charge and then swings out freely, like a struck pendulum.
The maximum angle of that first swing, the throw, is proportional to the charge that passed. The constant of proportionality depends on the coil’s area and turns, the magnetic field, the suspension’s torsional stiffness and the period of free oscillation. In practice the constant is found by discharging a known capacitor charged to a known voltage, and the small loss caused by air and electromagnetic damping is corrected using the logarithmic decrement, measured from successive throws on the same side.
Reading the Throw
Because the deflections are small and the coil swings, the throw is normally observed with a lamp and scale or a telescope and scale, using the mirror attached to the suspension. A charge-discharge key connects the capacitor first to the battery and then to the galvanometer in one movement, and a damping key, which short-circuits the coil, brings it to rest quickly between readings.
Experiments with a Ballistic Galvanometer
- Comparing two capacitances from the ratio of their discharge throws
- Measuring a high resistance by the leakage of charge from a capacitor
- Determining the charge sensitivity and logarithmic decrement of the galvanometer
- Measuring magnetic flux and mutual inductance with a search coil or a pair of coils
- Finding the horizontal component of the Earth’s magnetic field with an earth inductor
Specifications
| Type | Moving-coil galvanometer with suspended coil, ballistic type |
| Quantity measured | Charge passed in a short current pulse (first throw) |
| Reading method | Mirror on the suspension with lamp and scale or telescope and scale |
| Used with | Charge-discharge key, damping key, standard capacitor |
| Sensitivity and scale arrangement | Confirm at enquiry |
Care & Handling
- Clamp or lock the suspension before moving the galvanometer, since the strip that carries the coil is delicate.
- Level the instrument using its levelling screws so that the coil hangs freely in the magnet gap.
- Set it on a firm, vibration-free bench away from steel cabinets and stray magnetic fields.
- Never connect it directly across a power supply; a steady current far beyond its sensitivity can damage the suspension.
Why Choose LabEquip
University and college physics laboratories use this instrument in the charge and capacitance experiments of their practical syllabus, often with a decade capacitance box. LabEquip includes it in its physics lab equipment range, and the keys, capacitor and scale arrangement can be discussed through our contact page.
Frequently Asked Questions
What is the difference between a ballistic galvanometer and an ordinary galvanometer?
An ordinary galvanometer is damped so that its coil settles quickly at a steady deflection for a steady current. The ballistic type has a heavy coil and little damping, so it responds to the total charge of a brief pulse with a free swing called the throw.
Why is the first throw used rather than the steady deflection?
A short pulse of charge produces no steady deflection at all. The coil swings out once and oscillates, and only the first throw is proportional to the charge, after a small correction for damping.
What is the logarithmic decrement and why is it needed?
It is the natural logarithm of the ratio of successive throws on the same side. It measures how much energy the swinging coil loses each cycle and is used to correct the observed first throw to the value it would have without damping.
How do I bring the coil to rest between readings?
Press the damping key, which short-circuits the coil. The induced current in the shorted coil opposes its motion and stops the swing quickly, so the next reading can be taken without waiting.
Can a ballistic galvanometer measure steady currents?
It can show a steady deflection, but that is not its purpose and it is slow to settle because it is lightly damped. For steady currents use a moving-coil meter or a spot galvanometer designed for that.
Why must the instrument be levelled?
The coil hangs on a fine suspension inside a narrow magnet gap. If the case is not level, the coil can touch the pole pieces or the core, which adds friction and spoils the throw readings.
Last Updated: October 2026










Reviews
There are no reviews yet.