Quick Answer: An analytical balance is a laboratory balance built for the finest routine weighing, with a glazed draught shield around the pan, used for preparing standard solutions, gravimetric analysis and accurate sample weighing. This listing covers the analytical class; the exact mechanism and readability are matched to your requirement.
What Sets an Analytical Balance Apart
Instruments of this class are the most sensitive balances in everyday laboratory use, a step above top-pan precision balances. At that sensitivity a breath of air, a warm hand near the chamber or a static charge on a plastic vessel all show in the result, so the weighing pan sits inside a draught shield whose doors are closed for every measurement. The instrument stands on a heavy bench or a weighing table so that vibration from the floor does not reach the pan.
Electronic models generally work by electromagnetic force compensation: a coil in a magnetic field produces just enough force to hold the pan at a fixed null position, and the current needed is a measure of the load. Older instruments compare the load with weights on a knife-edge beam instead, and LabEquip lists a separate mechanical analytical model of that kind. Say which mechanism you need when you send a requirement.
Typical Analytical Weighings
- Weighing primary standards such as potassium hydrogen phthalate for volumetric solutions
- Gravimetric analysis of precipitates dried and weighed in crucibles
- Weighing drugs and excipients in pharmaceutics and pharmaceutical analysis practicals
- Loss-on-drying, moisture and ash determinations on food, soil and plant samples
Good Weighing Practice
Level the balance with its feet and bubble indicator, and give an electronic model the warm-up time its manual asks for after switching on. Check it each day with a reference weight, tare the empty container, close the doors and wait for the stability indication before recording. Weigh hygroscopic or volatile samples in closed vessels, and if readings creep with plastic containers, change to glass or metal or use an anti-static device.
Specifications
| Class | Analytical balance |
| Weighing chamber | Glazed draught shield with doors |
| Typical uses | Standards, gravimetric analysis, sample preparation |
| Installation | Level, vibration-free bench away from draughts |
| Mechanism (electronic or mechanical), capacity and readability | Confirm at enquiry |
Care & Handling
- Brush spilled powder out of the chamber with a soft brush; never blow it out.
- Re-level the balance and repeat the daily check whenever it has been moved.
- Let hot or cold vessels reach room temperature before they go on the pan.
- Keep liquids away from the housing and protect electronic models from power surges.
Why Choose LabEquip
Chemistry, pharmacy and food-testing departments in colleges buy analytical balances for quantitative practicals and project work. LabEquip lists this balance in its physics and weighing range; include the capacity and readability your syllabus needs in a message through LabEquip enquiries.
Frequently Asked Questions
How is an analytical balance different from a precision balance?
The analytical type resolves smaller masses and has an enclosed weighing chamber, while a precision top-pan balance has a larger capacity, coarser steps and usually an open pan. Use the analytical type when the experiment needs the finest resolution.
Why does the reading drift when I weigh in a plastic container?
Plastic containers often carry a static charge that pulls on parts of the balance and shifts the result. Use a glass or metal vessel, an anti-static device, or give the charge time to dissipate before weighing.
How often should the balance be checked?
A quick check with a reference weight at the start of each working day is common practice, with a full calibration at intervals set by the laboratory’s quality procedures. Record each check so that drift is noticed early.
Why must the draught shield doors be closed?
Moving air presses on the pan and makes the last digits wander. Closed doors keep the air still around the sample so the instrument settles to a steady value.
Can the balance stand on an ordinary table?
It performs properly only on a heavy, rigid bench or a dedicated weighing table away from doors, fans and footfall. A light table that flexes makes the final digit unstable.
Is this listing electronic or mechanical?
The title names the analytical class only. LabEquip also lists a mechanical analytical model separately, so state the mechanism, capacity and readability you need when you enquire and the matching model will be identified.
Last Updated: October 2026










Reviews
There are no reviews yet.