Quick Answer: The Assorted Metallic Conductors Set is a collection of conductors made from different metals, used in the physics laboratory to compare how well each metal conducts electricity. With a supply and meters, an assorted metallic conductors set shows that all metals conduct but with different resistances, leading to the idea of resistivity.
Same Size, Different Metal
The resistance of a conductor depends on three things: its length, its cross-sectional area and the material it is made of, summed up as R = ρL/A, where ρ is the resistivity of the material. When conductors of matching length and thickness are compared, length and area cancel out of the comparison and any difference in resistance comes from the metal alone. That is the point of an assorted set: it isolates material as the single variable.
In a simple class version, each conductor is placed in turn in a series circuit with a low-voltage supply, an ammeter and a voltmeter across the sample. Dividing the voltage by the current gives the resistance of each piece, and ranking the results shows, for example, that copper conducts far better than iron, and that alloys made for heating elements resist current strongly. Which metals and what form the set contains should be confirmed when ordering, since sets vary.
From Ranking to Resistivity
Older students go further by measuring the length and the diameter of each sample with a metre scale and a micrometer and calculating resistivity itself. Because resistivity is a property of the material, it should come out nearly the same for two samples of one metal with different dimensions, which is a useful check on the method. A meter bridge or a multimeter on its lowest resistance range gives better readings than a voltmeter and ammeter when the resistances are very small.
Experiments With the Set
- Ranking metals in order of electrical conductivity
- Calculating resistivity from resistance, length and diameter
- Showing that a lamp glows brighter with a good conductor in the circuit
- Explaining why copper is used for wiring and alloys for heating elements
Specifications
| Purpose | Comparing electrical conduction in different metals |
| Key relation | R = ρL/A; resistivity depends on the material |
| Measured with | Ammeter and voltmeter, meter bridge or multimeter |
| Supply | Low-voltage DC from cells or an eliminator |
| Metals included, sizes and form | Confirm at enquiry |
Care & Handling
- Clean oxidised ends with fine abrasive paper before connecting, so contact resistance does not spoil readings.
- Use a low voltage and switch off between readings; resistance changes if the samples warm up.
- Keep the samples straight and unkinked, and store them labelled by metal.
- Avoid bending soft metals repeatedly at one point, which work-hardens and eventually breaks them.
Why Choose LabEquip
Teachers assembling electricity experiment kits for schools add a conductors set so students can test materials, not just circuits. LabEquip lists it among its physics equipment; for comparing heat conduction instead, see the heat conductivity apparatus, and set contents can be discussed through the contact page.
Frequently Asked Questions
Why must the conductors be the same length and thickness?
Resistance depends on length and cross-sectional area as well as material. Keeping both the same leaves the metal as the only thing that changes, so differences in resistance can be traced to the material.
What is resistivity?
Resistivity is the resistance of a sample of unit length and unit cross-sectional area. It belongs to the material, not to a particular wire, so it lets different metals be compared fairly.
Why does a conductor’s resistance change while it is being measured?
Current heats the conductor, and the resistance of a metal rises with temperature. Use a low current and take readings quickly, switching off between them.
Which metals are the strongest electrical conductors?
Silver conducts most readily, followed closely by copper, then gold and aluminium. Iron and many alloys conduct much less well, which is why alloys are chosen for heating elements.
Can the set be used to compare heat conduction as well?
Electrical and thermal conduction in metals are closely linked, so good electrical conductors are usually good heat conductors. For a heat experiment, though, apparatus designed to measure heat flow gives clearer results.
How should the samples be connected?
Use clip leads or terminals at the ends of each sample, with the voltmeter connected directly across the sample rather than across the leads. This keeps the resistance of the leads out of the reading.
Last Updated: October 2026










Reviews
There are no reviews yet.