Quick Answer: This 200V digital voltmeter is a digital meter titled for 200 volts that displays potential difference as a number. It covers voltages beyond the low-range meters used with cells, such as the outputs of variable power supplies and long series strings of cells, and it is connected in parallel across the source or component being measured.
When a Higher-Range Meter Is the Right Choice
Most school circuit practicals run from cells or low-voltage supplies and are measured most precisely on a meter with a range of a few volts. Some work goes further: checking the output of a variable power supply across its full setting, measuring a long series string of cells or a solar panel, or monitoring the supply to a heater or motor in a teacher-led demonstration. A meter titled for 200 V can be connected in these places without being overloaded.
The trade-off is precision at the low end. A digital display has a fixed number of digits, so a meter that must show up to 200 V usually cannot show hundredths of a volt. A 1.5 V cell may read as 1.5 rather than 1.52, which is fine for checking a supply but too coarse for internal resistance measurements. Many laboratories therefore keep a low-range meter for cells and a higher-range meter for supply and demonstration work.
Higher voltages bring higher risk. Voltages well above those of a few cells can give a dangerous electric shock, and mains-derived voltages should be measured only by trained staff with properly rated, insulated leads and probes. Students should use the meter with low-voltage sources, connect it with the supply switched off, and never touch bare conductors while a circuit is live.
Specifications
| Instrument | Digital voltmeter |
| Range | 200 V, as titled |
| Connection | In parallel across the source or component |
| Resolution | Coarser than a low-range meter at small voltages |
| AC or DC type, leads and power source | Confirm at enquiry |
Typical Uses
- Checking the full output range of variable laboratory power supplies
- Measuring the voltage of long series strings of cells and of solar panels
- Monitoring the supply voltage to heaters, motors and lamps in teacher demonstrations
- Comparing readings with a low-range meter to discuss range and resolution
Care & Handling
- Use the 200V digital voltmeter only with leads and probes rated for the voltage being measured, and keep fingers away from the metal tips.
- Switch off the supply before connecting or moving the leads, then switch on to read.
- Never use the meter on mains circuits in a student practical; leave mains measurements to qualified staff.
- Keep the meter dry and inspect the leads for cracked insulation before each use.
Why Choose LabEquip
Laboratories add a higher-range digital voltmeter for teacher demonstrations and power-supply checks that exceed the range of class meters. For cells and low-voltage circuits, the 10V digital voltmeter gives finer readings. Find more instruments in LabEquip’s physics lab equipment, or send questions through the contact page.
Frequently Asked Questions
Why not use a 200 V meter for everything?
A meter built for a high range shows small voltages with fewer decimal places. For cells and low-voltage circuits, a meter with a lower range reads more precisely, so it is better to match the meter to the job.
Is the voltmeter safe for students?
It is safe with low-voltage sources such as cells and laboratory supplies, connected with the supply off. Higher voltages can cause a dangerous shock, so work near the top of the range should be done or closely supervised by trained staff.
How should the voltmeter be connected?
In parallel, with one lead on each side of the source or component. Connect the leads with the circuit switched off, then switch on and read. Observe polarity on a DC model; a reversed connection usually shows as a minus sign.
What does 200V in the title mean?
It is the voltage the meter is titled for, the top of the range it is offered to measure. Exceeding the range of any meter risks damage and gives no valid reading.
Can the meter measure mains voltage?
Mains measurements should never form part of student practicals. They need instruments, leads and procedures rated for mains work and should be carried out only by qualified people. In many countries mains voltage is above 200 V in any case.
Why does the last digit flicker?
The meter samples the voltage several times a second, and small changes in the source or electrical noise shift the least significant digit. Record the steady value, or the middle of a small flicker, as the reading.
Last Updated: October 2026










Reviews
There are no reviews yet.