Quick Answer: The Split Weights 200g (Copper) are slotted masses: each disc has a slot cut from its edge to its centre so it can be slipped onto the stem of a weight hanger without unhooking the hanger. Split weights let students add load in steps while a spring, string or lever stays loaded, in experiments on force, moments and simple machines.
Why Split Weights Have a Slot
With hooked weights, adding load means unhooking the last weight, hanging the next and re-hooking, and every change jerks the spring or string being tested. Slotted masses avoid this. The slot lets each disc slide sideways onto the hanger stem and drop onto the discs below, so load is added in smooth steps without disturbing the set-up. Discs are usually placed with their slots turned in different directions so the stack cannot slide off when the hanger swings.
In Hooke’s law experiments this matters a great deal. The extension of the spring is read after each disc is added and again as each is removed, and a jerk at every change would overstretch the spring and confuse the readings. The same smooth loading helps on a force table or a pulley system, where results depend on the load being changed gently.
The value in the title, 200 g, is the mass the set is listed for, and copper is the metal named. Copper is dense, so copper masses are compact for their weight and the stack stays short on the hanger. For calculations, students convert mass to weight with W = mg, so a 200 g load weighs about 1.96 N where g is 9.8 N/kg.
Experiments That Use Slotted Masses
- Loading springs step by step in Hooke’s law and spring-constant experiments
- Hanging loads on force tables and parallelogram of forces apparatus
- Providing load and effort on levers, pulleys and wheel and axle machines
- Applying a steady pulling force to trolleys in Newton’s second law practicals
- Measuring friction by adding load to a block until it slides
Care & Handling
- Lower the discs onto the hanger gently rather than dropping them, so the spring or string is not jerked.
- Turn the slots of neighbouring discs in different directions to stop the stack sliding off.
- Keep the copper surfaces dry and clean; over years, dirt and corrosion build up and change the values.
- Check the masses occasionally on a balance and set aside any disc that has been damaged or filed.
Specifications
| Type | Slotted (split) masses for a weight hanger |
| Mass value | 200 g, as titled |
| Material | Copper, as titled |
| Weight of 200 g | About 1.96 N, with g = 9.8 N/kg |
| Number of discs and whether a hanger is included | Confirm at enquiry |
Why Choose LabEquip
Physics laboratories need slotted masses for almost every mechanics practical, so split weights are usually bought in several sets. They suit the Hooke’s law apparatus and the wheel and axle on stand; browse LabEquip’s physics lab equipment for more, and ask about the make-up of the set on the contact page.
Frequently Asked Questions
What is the difference between split weights and hooked weights?
Split weights have a slot, so they slide onto a hanger stem and stack, letting load be added without unhooking anything. Hooked weights each carry a hook and are hung one below another, which is slower and jerks the apparatus at each change.
Why turn the slots in different directions?
If all the slots line up, a small swing of the hanger can let the whole stack slide off sideways. Staggering the slots locks the discs on the stem.
How do I convert the mass to a force?
Multiply the mass in kilograms by g. With g taken as 9.8 N/kg, 200 g, or 0.2 kg, has a weight of 1.96 N. Many classes use 10 N/kg for quick estimates, giving 2 N.
Why are copper weights compact?
Copper is a dense metal, nearly nine times as dense as water, so a given mass takes up little volume. Slotted masses of dense metal make short stacks that keep the load close to the hook.
How can the accuracy of the masses be checked?
Weigh each disc on a laboratory balance and compare it with its marked value. Record any difference, and use measured values in experiments where accuracy matters, such as finding a spring constant.
Which experiments need weights added in small steps?
Hooke’s law and elasticity experiments, where a graph needs many points; friction experiments, where load is increased until sliding starts; and machine experiments, where effort is built up until the load just rises.
Last Updated: October 2026










Reviews
There are no reviews yet.