Search

In Stock

Bar Magnet, Pair, Alnico

Cast Alnico Alloy Composition: Manufactured from a precision-cast Aluminum-Nickel-Cobalt alloy, offering high remanence (Br) and a superior temperature coefficient, ensuring consistent magnetic field strength and resistance to thermal demagnetization during intensive laboratory usage.

Matched-Pair Flux Continuity: Each set features precision-ground surfaces with clearly designated polarities and integrated soft-iron keepers, specifically designed to complete the magnetic circuit and prevent coercive force degradation during long-term storage.

₹270.00

Quick Answer: The Bar Magnet, Pair, Alnico is a matched pair of bar magnets made of alnico, an alloy of aluminium, nickel and cobalt with iron, each with a north pole at one end and a south pole at the other. An alnico bar magnet pair serves for field plotting, for demonstrating how like poles repel and unlike poles attract, and for magnetometer experiments.

Why Alnico, and Why a Pair

Alnico is a long-established permanent-magnet alloy. It holds a strong magnetisation and stays stable over a wide temperature range, which is why it became a standard material for school bar magnets. Its weakness is a relatively low resistance to demagnetisation compared with ceramic or rare-earth magnets: storing like poles together, dropping the magnets or bringing a strong opposing magnet close can all weaken them.

That is the reason for the pair. Laid parallel so that each north end sits beside the other bar’s south end, with soft-iron keepers bridging both ends, the two magnets form a closed magnetic circuit that helps them keep their strength. The pair is also what the experiments need: like poles repel and unlike poles attract, and two magnets placed end to end or side by side produce the field patterns and neutral points that students plot.

Field plotting is done with a plotting compass. With a bar magnet’s north pole pointing geographic north, the neutral points, where the magnet’s field cancels the horizontal part of the Earth’s field, lie east and west of the magnet; with the north pole pointing south, they lie beyond its ends along the axis. For a concentrated field between poles, compare the horseshoe magnet.

Specifications

Material Alnico (aluminium-nickel-cobalt-iron alloy)
Form Bar magnets, supplied as a pair, as titled
Poles North and south at opposite ends
Storage In pairs, opposite poles side by side, with keepers
Size, pole marking and keepers included Confirm at enquiry

Experiments

  • Plotting field lines with a plotting compass or iron filings
  • Locating neutral points in the combined field of the magnet and the Earth
  • Showing attraction and repulsion between poles
  • Comparing magnetic moments with a deflection magnetometer
  • Magnetising iron nails and needles by stroking

Care & Handling

  • Keep the two bars together with unlike poles adjacent and the keepers in place.
  • Do not drop, hammer or heat the magnets, which weakens them.
  • Keep them away from phones, computers, watches and cards with magnetic stripes.
  • Wrap the magnet in paper or a plastic bag before using iron filings, so the filings do not stick to it.

Why Choose LabEquip

Physics and general science departments teaching magnetism buy bar magnets in pairs for every practical group, and replace them when they weaken. LabEquip lists the alnico pair with its physics lab equipment; class quantities can be ordered through the contact page.

Frequently Asked Questions

What is alnico?

Alnico is a family of permanent-magnet alloys made mainly of aluminium, nickel and cobalt with iron. It holds its magnetism well and is stable over a wide temperature range, which made it a long-standing choice for school magnets.

Why do alnico magnets need keepers?

Alnico resists demagnetisation less strongly than ceramic or rare-earth magnets. Soft-iron keepers across the ends give the field a closed path, which helps the magnets keep their strength in storage.

How should the pair be stored?

Place the two bars parallel with unlike poles adjacent, so each north end lies beside a south end, bridge the ends with keepers and keep the set in its box, well apart from other magnets.

Where are the neutral points of a bar magnet?

With the north pole pointing geographic north, they lie east and west of the magnet; with the north pole pointing south, they lie beyond its ends on the axis. At these points the magnet’s field cancels the Earth’s horizontal field.

Can the magnets lose strength?

Yes. Dropping, heating, storing like poles together or bringing them near a strong opposing magnet can weaken them. Remagnetising with a suitable magnetising coil restores them.

How do I tell which end is north if the marking wears off?

Suspend the magnet horizontally on a thread, well clear of iron and other magnets, and let it come to rest; the end facing geographic north is its north pole. A plotting compass also works, since its south end turns towards the magnet’s north pole.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)