Quick Answer: This 15 cm carbon rod is a graphite rod for physics and chemistry electricity practicals. The 15 cm carbon rod serves as an inert electrode in electrolysis, as the positive electrode of simple zinc and carbon cells, and as an example of a non-metal that conducts electricity.
Why the Length Matters
Fifteen centimetres is long enough for the rod to reach well down into a beaker or U-tube of electrolyte while its top end stays dry above the liquid, where a crocodile clip or electrode holder can grip it. Keeping the metal clip out of the solution matters: a clip dipped into copper sulfate or salt solution reacts or corrodes, and its products confuse the observations.
Graphite is the one common non-metal that conducts electricity well, because each carbon atom in its layers leaves one electron free to move. Placing the rod in a simple circuit with a lamp, alongside a lump of sulfur or a plastic rod, makes the point that conduction is not limited to metals. The same property, together with its resistance to attack, made carbon the positive electrode of zinc and carbon dry cells, and students can build a wet version by standing the rod and a strip of zinc in salt or ammonium chloride solution and measuring the voltage.
In electrolysis the rod acts as an inert electrode in most school experiments, so the products seen come from the electrolyte. With potassium iodide solution, brown iodine forms at the positive rod and hydrogen bubbles at the negative one. With copper chloride, copper coats the cathode while chlorine is released at the anode, which should be done in small quantities with good ventilation. Over long runs, oxygen released at an anode slowly erodes carbon, so a rod used as an anode for many sessions gradually wears.
Applications
- Inert electrodes for electrolysis of potassium iodide, copper chloride and copper sulfate solutions
- Building simple zinc and carbon cells and measuring their voltage
- Showing that graphite, a non-metal, conducts electricity
- Testing liquids and solutions for conductivity with a lamp or meter
- Making electrodes for project work on cells and electroplating
Specifications
| Item | Carbon (graphite) rod |
| Length | 15 cm, as titled |
| Role | Inert electrode and non-metal conductor |
| Connection | Crocodile clip or holder on the dry end above the liquid |
| Diameter and pack quantity | Confirm at enquiry |
Care & Handling
- Clamp the rod so the connection stays above the liquid, and immerse only the lower part.
- Rinse the 15 cm carbon rod in water after each run and dry it standing up, since graphite absorbs electrolyte.
- Keep rods used as anodes separate from fresh ones, and lightly rub a coated or eroded surface clean before reuse.
- Handle with care: carbon rods are brittle and break if dropped or levered against a beaker, and graphite marks hands and benches.
Why Choose LabEquip
Schools buy carbon rods in packs for electrolysis and cell-building practicals shared between chemistry and physics. LabEquip also lists an electrolysis carbon rod with no length in its title; this 15 cm rod suits deeper vessels. Both are part of the physics lab equipment range, and quantities can be requested through the contact page.
Frequently Asked Questions
Why use a carbon rod rather than a metal rod as an electrode?
Many metals react when used as electrodes: a copper anode dissolves and an iron one is attacked. Carbon is largely unreactive in school electrolytes, so what forms at the rod comes from the solution and can be identified with confidence.
Why is the rod 15 cm long?
The length lets the rod reach the lower part of a beaker or U-tube while the top stays above the liquid for the clip. A dry connection avoids corrosion of the clip and keeps metal ions out of the electrolyte.
Can the carbon rod make a battery?
Yes. Stand it in salt or ammonium chloride solution with a strip of zinc and connect a voltmeter between them. The zinc is the negative terminal and the carbon the positive, as in a zinc and carbon dry cell.
Why does a carbon anode wear away?
When oxygen forms at a carbon anode, some of it reacts with the carbon to make carbon dioxide, and the surface slowly crumbles. Rods used as anodes for long periods therefore thin and roughen over time.
Why does graphite conduct when most non-metals do not?
In graphite each carbon atom bonds to three others in flat layers, leaving one electron per atom free to move along the layers. These delocalised electrons carry current, much as free electrons do in a metal.
How should the rods be cleaned between experiments?
Rinse in plenty of water and let them dry upright. Copper deposits can be removed with dilute acid, and a light rub with fine abrasive paper refreshes a stained surface. Dry them fully before storage.
Last Updated: October 2026










Reviews
There are no reviews yet.