Search

In Stock

DIGITAL 10A DC AMMETER

Direct current measurement range up to 10 amperes, suitable for low- and medium-power circuit testing

High-contrast digital display with internal shunt design, ensuring stable and readable measurements

₹645.00

Quick Answer: The digital 10A DC ammeter is a digital meter for direct current, titled for 10 amperes, that shows the current flowing through a circuit as a number on its display. Connected in series, the digital 10A DC ammeter suits practicals with comparatively large currents, such as motors, heating coils, lamps in parallel and electrolysis.

Reading Current with a Digital Ammeter

An ammeter measures the current that passes through it, so it must become part of the circuit. Break the circuit at the point of interest and connect the meter across the gap, with its positive terminal towards the positive side of the supply. Inside, the current passes through a very low resistance called a shunt, and the meter measures the small voltage across that shunt and displays it as a current. Because the shunt’s resistance is small, the meter barely changes the current it measures.

A 10 A range covers circuits that would overload a milliammeter: a small DC motor under load, a nichrome heating coil, several lamps in parallel or an electrolysis cell driven hard. For currents of a few milliamps, however, a meter built for amperes may not show enough digits to read them precisely, so a milliammeter or a lower range is the better choice for that work.

Most digital DC meters show a reversed connection as a minus sign rather than driving a needle against its stop, which makes them forgiving in student hands. What an ammeter cannot tolerate is being connected directly across a cell or supply. With almost no resistance of its own, it would then carry a very large current, and that mistake, rather than wrong polarity, is the one to warn students about.

Where a 10 A Range Is Needed

  • Measuring current in series circuits with motors, heating coils and lamps
  • Recording current in electrolysis and calculating the charge passed as current × time
  • Ohm’s law and electrical power experiments where currents reach the ampere range
  • Measuring how the current drawn by a motor changes with its mechanical load
  • Checking the current drawn from a power supply or battery eliminator

Specifications

Instrument Digital ammeter for direct current
Range 10 A, as titled
Connection In series with the circuit, observing polarity
Display Numerical readout of current
Resolution, power source and mounting Confirm at enquiry

Care & Handling

  • Connect the digital 10A DC ammeter in series only, never directly across a cell, battery or power supply.
  • Switch the supply off before connecting or disconnecting the meter, and use leads thick enough for the currents involved.
  • Avoid running it near the top of its range for long periods; large currents warm the shunt and connections.
  • Keep it dry and away from electrolyte splashes during electrolysis work.

Why Choose LabEquip

Physics laboratories add a 10 A digital ammeter to their benches for motor, heating and electrolysis practicals that exceed the range of milliammeters. Pair it with the digital 10V voltmeter for power measurements, and see LabEquip’s physics lab equipment for rheostats and supplies. Use the contact page for quantities and power details.

Frequently Asked Questions

Why must an ammeter be connected in series?

An ammeter measures the current flowing through it, so all the circuit current must pass through the meter. Connected in parallel, it would offer a very low-resistance path, draw a large current and could be damaged.

What happens if the leads are reversed?

On most digital DC ammeters the reading simply shows a minus sign. Swap the leads to read a positive value. No harm is done, unlike an analogue meter whose needle is driven against its stop.

Is a 10 A meter suitable for small currents?

It will show them, but with fewer meaningful digits. A current of a few milliamps may read as only a couple of hundredths of an ampere. For low currents a milliammeter or a lower range gives better precision.

How is electric charge found with the ammeter?

Keep the current steady using a rheostat, record it and time how long it flows. Charge equals current multiplied by time, in coulombs, which is the basis of electrolysis calculations in chemistry and physics.

Why do the leads get warm at high currents?

Every lead and connection has a little resistance, and the heating effect grows with the square of the current. Use short, thick leads and tight terminals when currents approach several amperes.

Does the ammeter affect the circuit it measures?

Very slightly. Its internal resistance is low but not zero, so it adds a small voltage drop. In low-voltage, low-resistance circuits that drop can matter, so allow for it when comparing measured and calculated currents.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)