Search

In Stock

Stereo Zoom Microscope, 30 degrees with LED (0.7:4.5)

High-Performance 1:6.4 Parfocal Zoom System: Engineered with a continuous 0.7x to 4.5x magnification range, the optical path utilizes multi-coated achromatic lenses to maintain sharp focus and color fidelity throughout the entire zoom sweep without requiring manual refocusing.

Integrated Dual-LED Intensity Control: Features a specialized binocular head paired with independent incident and transmitted LED arrays, offering adjustable flicker-free luminosity that prevents thermal specimen damage while significantly enhancing topographical contrast for translucent samples.

₹6,200.00

Quick Answer: The Stereo Zoom Microscope, 30 degrees with LED (0.7:4.5) is an LED stereo zoom microscope with a 30° viewing head and a zoom body running from 0.7x to 4.5x. It is used for scanning, dissection and inspection work that moves repeatedly between a wide view and close detail.

The 0.7x to 4.5x Range in Use

The low end of a zoom sets the widest field of view and the greatest depth of field. Starting at 0.7x rather than 1x shows noticeably more of the specimen at once, which makes it quicker to find a single larva in a sample dish or a fault on a board. At the high end, 4.5x gives a little more enlargement than a 1x to 4x zoom, making a span of about six and a half times overall.

The 30° head and LED illumination are the other listed features. LED light stays cool, so small living animals and moist plant material can be watched for longer without drying out, and the lighting is consistent from session to session. Where the light position, above, below or both, matters for your specimens, confirm it, since the listing says LED only.

Among LabEquip’s 30° LED zoom models, this sits between the 1:4 version and the 0.8:5 big-base version: wider-ranging than the first, without the enlarged base of the second.

Applications

  • Scanning bulk samples such as plankton, soil or grain at the wide 0.7x end
  • Fine dissection of insects and seeds
  • Counting and examining bacterial or fungal colonies on agar plates
  • Examining gemstones, coins and small components

Specifications

Type Stereo zoom microscope
Zoom range 0.7x to 4.5x (as listed)
Zoom span About 6.4 times, lowest to highest
Head angle 30°
Illumination LED
Eyepieces and light position Confirm at enquiry

Care & Handling

  • Keep the LED stereo zoom microscope’s objective covered while soil, sawdust or powders are being handled nearby.
  • Clean agar or culture spills from the stage with disinfectant, keeping it away from the objective.
  • Never touch the objective’s front lens; if a fingerprint appears, blow off grit, then wipe with lens tissue and a drop of cleaning fluid.
  • Turn the microscope off at its switch before pulling the plug.

Why Choose LabEquip

Microbiology labs counting colonies, environmental labs sorting samples and workshops inspecting small parts choose the 0.7:4.5 model for its wide low end. It is part of the LabEquip Microscope & Optics range; ask for eyepiece options on the contact page.

Frequently Asked Questions

Why does a lower starting zoom matter?

A lower minimum gives a wider field of view and more depth of field, so more of the specimen is visible and in focus at once. That makes searching faster before zooming in on detail.

How does it differ from the 1:4 model?

Both have a 30° head and LED lighting. This one zooms from 0.7x to 4.5x instead of 1x to 4x, so it starts wider and ends slightly higher.

Can I count colonies on agar plates with it?

Yes, stereo zoom microscopes are widely used for this. Place the closed plate upside down on the stage, work at the low end of the zoom, and mark each colony on the base with a pen as it is counted.

How do I stop the image drifting out of focus when I zoom?

Set focus at the highest zoom setting, then zoom out. If the image still drifts, adjust the diopter rings so each eye is sharp at high zoom, then check again at low zoom.

What is depth of field and why does it change with zoom?

Depth of field is the thickness of the specimen that appears sharp at once. It is greatest at low zoom and smallest at high zoom, so a rough, uneven specimen looks sharpest overall at the low end.

How should agar plates be handled on the stage?

Keep lids on, disinfect the stage after viewing, and discard plates as microbiological waste according to the lab’s rules. Plates that are to be kept should be handled in a clean area to avoid contamination.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)