Search

In Stock

Profile Projector, Student, 200mm

200mm Ground Glass Screen with 360° Rotary Scale: Features a fine-grain, anti-glare viewing surface integrated with a built-in vernier protractor, enabling angular measurements with a resolution of 1 minute to ensure high-fidelity profile assessment.

Precision Mechanical XY Stage with Micrometer Heads: Equipped with a heavy-duty stage assembly providing 25x25mm travel, utilizing high-precision micrometer heads for sub-millimeter linear displacement and rigorous dimensional verification of micro-machined parts.

$86.38

Quick Answer: The Profile Projector, Student, 200mm is a teaching optical comparator that throws a magnified silhouette of a small component onto a viewing screen, where its outline can be measured or compared with a chart. On a 200mm profile projector of this kind, the size figure normally refers to the screen diameter.

Measuring by Shadow

A profile projector shines light past a small part placed on its stage and projects the shadow through a lens onto a translucent screen at a known magnification. Because the outline is enlarged, a thread form, gear tooth, radius or chamfer that is hard to judge by eye becomes easy to compare with a template chart or to measure against the screen’s reference lines. Nothing touches the part, so soft, thin or delicate components are not deformed during checking.

In the listing, ‘Student’ marks this as a teaching model and 200mm is the size figure. A smaller screen limits how much of a magnified outline can be seen at once, which is usually fine for training exercises with small turned parts, screws and springs. The listing does not state the magnification lenses, stage travel or measuring readout, so check those against the syllabus exercises. LabEquip also lists a 300mm student model with a larger screen.

For measuring individual features rather than whole outlines, the Tool Maker Microscope is the related instrument.

Applications

  • Teaching non-contact inspection in mechanical engineering and polytechnic metrology labs
  • Checking screw thread form and pitch against a template chart
  • Comparing gear tooth profiles and radii with overlay charts
  • Inspecting small pressed or moulded parts for burrs and outline defects

Specifications

Instrument Profile projector (optical comparator), student model
Size figure 200mm, normally the screen diameter
Method Magnified silhouette of the part projected onto a screen
Contact with part None; measurement is optical
Typical parts Screws, threads, gears, springs, small turned and pressed parts
Lenses, stage travel and readout Confirm at enquiry

Care & Handling

  • Keep the stage glass and screen of the 200mm profile projector free of fingerprints; smudges on the stage show as shadows in the projection.
  • Switch the lamp off between exercises and let it cool before covering the instrument.
  • Place parts gently on the stage glass and never slide metal parts across it, as scratches become permanent marks in the image.
  • Keep the room dim near the screen for clearer outlines, and store overlay charts flat.

Why Choose LabEquip

Polytechnics, engineering colleges and industrial training institutes that teach metrology buy student profile projectors for their measurement labs. This model is listed in the LabEquip Microscope & Optics range.

Frequently Asked Questions

What is a profile projector used for?

It checks the outline of small parts by projecting their magnified shadow onto a screen. The projected profile is compared with a chart or measured against reference lines, without touching the part.

What does 200mm refer to?

On profile projectors the size figure normally describes the diameter of the viewing screen. A 200mm screen shows a smaller area of the enlarged outline than a 300mm screen, which suits small parts and teaching exercises.

How is the magnification set?

Magnification comes from the projection lens in use, and many projectors accept interchangeable lenses. Choose the lens that keeps the feature fully on the screen while making it large enough to judge.

Why are overlay charts used?

A chart drawn at the projector’s magnification is placed on the screen, and the projected outline is compared with it. This quickly shows whether a thread form, radius or angle lies within the drawn limits.

What parts are unsuitable for a profile projector?

Parts too large for the stage or the lens field, and features hidden inside a part, cannot be shown as a silhouette. Transparent parts give weak outlines and need care with lighting.

How should the projector be set up in the lab?

Place it on a steady bench away from bright windows, so daylight does not wash out the screen. Students should sit square to the screen so they read outlines without parallax.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)