Quick Answer: The Hand Microtome, Bench Type is a manually operated sectioning device that fixes to the edge of a bench and raises the specimen in small steps with a feed screw, while the user draws a razor across its flat cutting table. A hand microtome bench type is mainly used for thin sections of stems, roots and leaves in botany.
How the Bench Hand Microtome Cuts
The specimen, for example a piece of sunflower stem, sits in a vertical well, often wedged between two halves of carrot, potato or elder pith to hold it upright. Turning the feed screw raises it a small amount above the flat table on top of the instrument. A sharp razor or section knife is then drawn across the table in one smooth stroke, slicing off a section of even thickness. Repeating the turn-and-cut cycle gives a series of sections.
The bench type clamps to a table, which leaves both hands free for the razor and for lifting sections with a wet brush. A hand-held microtome, gripped in one hand, is more portable but harder to keep steady. Compared with cutting freehand with a razor alone, the feed screw gives more even thickness, which makes staining and tissue identification easier for students. The listing does not state the well diameter or the screw graduation, so check the largest specimen size you need before ordering.
Sections from a hand microtome are unembedded, so it suits firm plant material rather than soft animal tissue, which is cut from wax blocks on instruments such as the Rocking Microtome.
Applications
- Transverse sections of dicot and monocot stems to compare vascular bundle arrangement
- Root sections showing the endodermis and the xylem pattern
- Leaf sections held in pith to show palisade and spongy mesophyll
- Wood and petiole sections in botany and pharmacognosy practicals
Care & Handling
- Keep the cutting table of the hand microtome bench type wet with water or dilute alcohol while sectioning, so sections slide onto the razor rather than tearing.
- Wipe and dry the screw thread and table after use, and put a drop of light oil on the thread to stop it seizing.
- Store razors separately with the edge guarded; a nicked blade leaves score marks across every section.
- Tighten the bench clamp against a firm edge before cutting so the instrument does not rock mid-stroke.
Specifications
| Instrument | Hand microtome, bench (clamp-on) type |
| Feed | Screw raises the specimen above the cutting table |
| Cutting | Razor or section knife drawn across the table by hand |
| Specimen support | Carrot, potato or pith packing around the tissue |
| Suitable material | Firm plant stems, roots, leaves and petioles |
| Well size and feed graduation | Confirm at enquiry |
Why Choose LabEquip
Botany departments, school biology labs and pharmacy colleges teaching plant anatomy buy bench hand microtomes in numbers for student practicals. LabEquip lists it in the Microscope & Optics range, and students can compare their own stained sections with prepared slides of the same organs.
Frequently Asked Questions
What is the difference between a bench type and a hand-held microtome?
The bench type clamps to the table, so it stays still while you draw the razor across it with both hands available. A hand-held microtome is gripped in one hand, which is more portable but makes steady cutting harder to learn.
Which razor should I use?
A flat-ground section razor or a sharp single-edged blade in a holder works well. Draw the blade across the table at an angle in one continuous stroke rather than pushing it straight down.
Why pack the specimen in carrot or pith?
Thin stems and leaves bend under the blade. Wedging them between firm, easily cut material such as carrot, potato or elder pith holds them upright and supports the edges during the cut.
Can I cut animal tissue on a hand microtome?
Only firm, fixed material cuts reasonably well. Soft animal tissue needs support from paraffin wax or freezing, so it is sectioned on a rotary, rocking or freezing microtome instead.
How are the sections stained?
Float the sections in water in a watch glass, pick out the thinnest with a brush, and stain them, for example with safranin alone or with safranin and fast green. Mount in glycerine under a coverslip for viewing.
Why are my sections uneven in thickness?
Uneven sections usually come from a dull blade, a specimen that is loose in the well, or turning the feed screw by different amounts between cuts. Turn the screw by the same small step each time and keep the blade sharp and wet.
Last Updated: September 2026










Reviews
There are no reviews yet.