Spatula, Superior, Laboratory, One Side Flat, One Side Spoon

Quick Answer: The superior laboratory spatula is the higher-grade version of LabEquip’s double-ended flat and spoon spatula. It is intended for college, research and quality-control laboratories where spatulas are used daily for weighing and transferring solid reagents.

Where the Higher Grade Earns Its Keep

In a laboratory that weighs samples every day, a spatula is picked up dozens of times per shift, and small differences matter: how well the blade keeps its shape, how easily residue wipes off the spoon, and how cleanly powder slides off the flat end when the user taps it. The Superior grade is the version of the flat and spoon pattern that LabEquip offers for this kind of use. Exact thickness, finish and length should be confirmed when ordering.

Careful weighing on a sensitive balance depends on technique as much as on the tool. Bring solid to the weighing boat on the spoon end, then add the last few milligrams by gently tapping the handle of the spatula held over the boat, so the reading approaches the target slowly. Close the draft shield before reading and brush away any spilled grains from the pan area.

For classes and routine teaching, the lower grades of the same shape are usually adequate; the Laboratory version is the general-purpose option.

Specifications

Care & Handling

• Clean the spatula immediately after use; dried residue is harder to remove from the spoon.
• Rinse with distilled water or a volatile solvent before weighing for analysis.
• Keep one spatula per reagent where cross-contamination would affect results.
• Store in a closed drawer or rack to keep dust off the working ends.

Applications

• Weighing primary standards for titration on an analytical balance
• Sampling raw materials and finished products in quality-control laboratories
• Preparing reagents and buffers in research and college laboratories
• Transferring solids into volumetric flasks through a powder funnel

Why Choose LabEquip

College departments, research groups and quality-control laboratories are the main buyers of the Superior grade. LabEquip lists it in the General Lab Products range; use the contact page to confirm details or order mixed grades.

Frequently Asked Questions

What does Superior mean in this listing?

It is the higher grade of LabEquip’s flat and spoon spatula, above the Laboratory and Student versions. Confirm the specific differences in thickness, finish and length when you enquire.

How do I add the last few milligrams when weighing?

Hold the spatula with a little solid on it over the weighing boat and tap the handle gently with a finger, so grains fall a few at a time. Stop when the balance reaches the target.

Why does powder cling to the spatula?

Static charge, moisture or a rough surface can make fine powder stick. A clean, dry spatula helps, and an antistatic weighing boat or ioniser reduces static in dry rooms.

Should I use the same spatula for different reagents?

Only if it is cleaned and dried between them. In analytical and quality-control work, many laboratories keep a dedicated spatula for each reagent to avoid carry-over.

Can the spatula be sterilised?

Metal spatulas are generally sterilised by autoclaving or by dipping in ethanol and flaming. Check the item’s rating before autoclaving and let it cool before use.

Is this grade needed for school teaching?

Usually not. Schools often use the Student or Laboratory grades of the same shape. The Superior grade suits laboratories where the spatula is in constant daily use.

Last Updated: September 2026