Floor Up Projection Screens

Quick Answer: A Floor Up Projection Screen is a portable screen housed in a case that stands on the floor; the fabric is pulled up out of the case and held open by a rising support, usually a scissor mechanism or a rear post. A floor up projection screen gives a free-standing picture anywhere there is floor space, without wall or ceiling fixing.

A Screen That Rises from the Floor

Floor-up screens reverse the usual arrangement. Instead of dropping from a roller at the top, the fabric is stored in a long, low case and drawn upwards. In common designs a folding scissor-arm linkage or a telescopic post behind the fabric lifts the top bar and holds it at the chosen height, so there are no legs spreading out in front of the image as with a tripod. Many cases have a handle for carrying between rooms. The listing does not say which lifting mechanism, case material or size is supplied.

The format suits rooms where drilling is not possible or not allowed: rented halls for science fairs, exhibition stands, laboratories with glazed or tiled walls, and multipurpose rooms that are rearranged often. Because the case sits on the floor, the bottom of the image starts at case height, which may be too low for rows of seated viewers at the back; raising it on a stable stage improves sight lines.

For set-up at greater height, the tripod projection screen is the other portable option, while rooms with a permanent projector are better served by a fixed frame screen.

When a Floor-Up Screen Is the Answer

• Science exhibitions and fairs where students present projected results in halls.
• Temporary training sessions in laboratories or offices without a screen.
• Rooms with tiled, glazed or heritage walls that cannot be drilled.
• A shared screen moved between classrooms for occasional presentations.

Care & Handling

• Lift and lower the screen smoothly by the top bar; letting it drop back into the case strains the mechanism and can crease the fabric.
• Close the case completely before carrying so the fabric edge is not snagged.
• Place the case on a firm, level floor, away from walkways where it could be kicked or tripped over.
• Store the case horizontally in a dry place.

Specifications

Why Choose LabEquip

Floor-up screens suit schools, colleges and training centres that need a screen in several rooms or at events. LabEquip lists this screen in its General Lab Products range; share the image size and venues on the contact page.

Frequently Asked Questions

How does a floor up screen differ from a tripod screen?

A floor up screen rises vertically out of a case on the floor and is held by a support behind the fabric, so it has no legs spread out in front. A tripod screen hangs from a stand with three legs and can usually be set higher.

Does it need to be fixed to a wall or ceiling?

No. It is free-standing, which makes it useful in rooms where drilling is not allowed and at temporary venues such as exhibitions and halls.

How do I get the image high enough for seated viewers?

Raise the screen to its full working height and tilt the projector upward only slightly. If people at the back still cannot see the lower part, place the case on a stable stage or platform, or stagger the seating.

Can the screen be used outdoors?

Only in sheltered settings. Wind catches the fabric easily and the image is weak in daylight, so it is better used indoors or at dusk, with the case on firm, level ground.

How should I pack the screen after use?

Lower the fabric slowly back into the case, making sure it winds evenly without creases, then close the case fully before carrying it.

Is it safe to leave standing during a lesson?

Yes, on a level floor out of walkways. The case forms the base, so keep it clear of feet, bags and trailing projector cables, and do not lean anything against the fabric.

Last Updated: September 2026