Wall Mounted Eye Wash For Pharma And Labs

Quick Answer: The Eye Wash, Wall Mounted is an emergency eye wash station fixed to a laboratory wall and plumbed to the water supply; it sprays water upward to flush the eyes after a chemical splash while the user bends over it.

Planning a Wall-Mounted Station

Fixing the eye wash to a wall frees the bench and sink for work and gives the station its own permanent, signposted place. A wall mounted eye wash typically has a bowl below the spray heads to catch the water, with a waste outlet that should be connected to a drain; without a drain, every weekly test and every real use floods the floor. Check whether this model has a bowl and waste connection when ordering.

The height is set so that an adult can lean forward with the eyes over the heads comfortably, and the paddle or handle must be easy to find without looking, since the user may have their eyes shut in pain. Place the unit where someone can reach it within a few seconds from any point where corrosives are handled, on the same floor, with no door or step in the way. A well-lit position with a clear sign lets visitors and new students find it quickly.

For a station that also treats splashes on the body, the Safety Shower with Eye Wash combines a drench shower with an eye wash. Where only a compact rinsing point is needed at the bench, the Eye Wash, Single is the smaller option.

Specifications

Item	Emergency eye wash for wall mounting
Supply	Plumbed to the water line
Use	User bends forward over the spray heads
Drainage	Waste to a drain recommended, to avoid flooding
Location	Within seconds of the hazard, same level, clear route
Bowl, heads and activation	Confirm at enquiry

Applications

Chemistry and pharmaceutical labs where the bench and sinks must stay clear.
Corridors or lab entrances serving several rooms, within easy reach of each.
Stores where acids, alkalis and other corrosives are kept and decanted.
Refurbishments adding an eye wash to an existing lab without new bench fittings.

Testing and Upkeep

Test weekly by running the unit into its bowl, and check that the water drains away freely.
Log each test and each use, with the date and the name of the person checking.
Keep the heads covered and the bowl clean; dust and insects collect in unused units.
Keep the supply valve to the eye wash open and labelled, so it cannot be closed by mistake.

Why Choose LabEquip

Pharmaceutical units, college labs and chemical stores fitting permanent safety stations are the main buyers of wall-mounted eye washes. LabEquip lists this model in General Lab Products.

Frequently Asked Questions

Why choose a wall-mounted eye wash instead of a bench unit?

It leaves the sink and bench free for work, has a fixed, signposted position that everyone learns, and can serve several work areas from one place, such as a lab entrance.

Does a wall-mounted eye wash need a drain?

It should be connected to one. Weekly tests and real use produce a good deal of water, and a unit without drainage floods the floor, which creates a slip hazard.

How quickly should a person be able to reach it?

Within a few seconds of any point where corrosive chemicals are handled, without climbing steps or passing through doors. Plan the position before fixing the unit.

At what height should it be mounted?

At a height where an adult can lean forward and hold the eyes over the spray heads comfortably. Follow the installation guidance supplied with the unit, and consider pupils’ heights in school labs.

What should happen after someone uses the eye wash?

They should get medical attention, taking the chemical’s name or its safety data sheet with them. Report the incident, and check that the unit is clean and working before the next session.

Can the eye wash be turned off at its supply to stop a leak?

Only for the time it takes to repair it. A valve that is left shut defeats the station, so fix leaks promptly and keep the supply valve open and labelled.

Last Updated: September 2026