Search

In Stock

Tubes, Sealed With Reduced Ends, With Sintered Disc, (Pipeline Filters)

Graded Porosity Sintered Matrix: Available in standardized porosity grades (1–5), the permanently fused-in glass disc ensures a controlled pore size distribution for precise particle exclusion and consistent laminar flow rates.

Precision Reduced-End Geometry: Featuring metrologically uniform inlet and outlet diameters, these tubes facilitate seamless integration into complex modular glass assemblies using standard flexible tubing or compression fittings.

₹450.00

Quick Answer: A pipeline filter of this type is a tube with a sintered disc sealed across its bore and both ends reduced to a narrower diameter for tubing connections. Fitted into a gas or liquid line, it traps particles in the flow, protecting pumps, valves, columns and reaction vessels downstream.

A Filter That Sits Inside the Line

Most laboratory filters are open funnels. This one is closed: the porous disc spans the inside of a tube, and the tube narrows at each end so flexible tubing can be pushed over it. Liquid or gas enters one end, passes through the disc and leaves from the other, with particles held back on the upstream face. Because the path is enclosed, it can be placed anywhere in a flow line, including under slight pressure or suction.

Sealed means the disc is fused into the wall rather than clamped, so there is no gasket to leak or react with the medium. Flow direction matters for cleaning: particles collect on the inlet face, so mark the inlet end and back-flush from the outlet side.

Similar sintered filters in open form include the sintered glass Buchner funnel, used when the solid itself is to be collected rather than removed from a stream.

Applications

  • Filtering a gas stream before it enters a flowmeter, drying train or analyser
  • Protecting a peristaltic or diaphragm pump from particles carried in a liquid line
  • Keeping fine particles out of solvent lines feeding a column or reactor
  • Removing dust or spray from gases bubbled through a reaction vessel

Specifications

Item Tube with a sealed-in sintered disc and reduced ends
Connections Reduced ends for push-on flexible tubing
Function In-line removal of particles from gas or liquid flow
Seal Disc fused into the tube wall, no gasket

Care & Handling

  • Mark the inlet end so the filter is always fitted in the same direction and can be back-flushed correctly.
  • Push tubing over the reduced ends with a slight twist, wetting it if needed; never force it, as the narrowed section is the weakest point.
  • Clean by back-flushing with a solvent that dissolves the deposit, then with water, and dry slowly.
  • Replace the filter if the disc cracks or separates from the wall, since particles will then bypass it.

Why Choose LabEquip

Research laboratories, pilot set-ups and teaching labs that build their own gas and liquid lines use a pipeline filter to protect sensitive parts downstream. You will find it in LabEquip’s chemistry lab equipment; porosity and tube size can be specified through the contact page.

Related Products

Frequently Asked Questions

What is an in-line sintered filter tube used for?

The pipeline filter has a sintered disc sealed across the bore of a tube with reduced ends. Fitted into a gas or liquid line, it traps particles in the flow, protecting pumps, valves, columns and reaction vessels further down the line.

What does ‘reduced ends’ mean on a filter tube?

Both ends of the tube are narrowed to a smaller diameter so flexible tubing can be pushed over them. That lets the filter be placed anywhere in a tubing line, with no extra adapters.

Which sintered disc porosity should be chosen?

Coarser discs let liquids and gases flow quickly and stop large particles; finer discs stop smaller particles but flow more slowly and block sooner. Choose the coarsest grade that still holds back the particles you need to remove.

How do I clean a blocked sintered filter?

Flush it backwards with water or a solvent that dissolves the deposit, then rinse. Many deposits dissolve in a suitable dilute acid. Avoid hydrofluoric acid and hot strong alkali, which attack glass frits, and avoid scraping the disc.

Can the sintered filter tube be used under pressure?

Filter tubes of this kind are usually glass, so they suit flows under slight pressure or suction, such as gas lines and gravity or pump-fed liquids at low pressure. They are not intended for high-pressure lines.

Does the flow direction through the filter matter?

Yes. Particles collect on the upstream face of the disc, so keep the same direction every time and mark it on the tube. Reversing the flow in use can push trapped particles downstream.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)