Search

In Stock

Tube, Ignition

Thermal Shock Resistance: Fabricated from low-expansion 3.3 borosilicate glass, these tubes are engineered to withstand rapid temperature fluctuations up to 500°C without compromising structural integrity or fracturing.

Heavy-Wall Construction: Featuring a uniform 1.0mm wall thickness and precision fire-polished rims, the design eliminates mechanical stress points and prevents chipping during high-temperature exothermic experiments.

$2.03

Quick Answer: An ignition tube is a small, usually thick-walled glass test tube used for heating tiny amounts of solid strongly in a flame. In qualitative analysis it is the tube for the sodium fusion (Lassaigne’s) test and for dry heating tests on salts.

A Small Tube for Fierce Heating

Some tests call for heating a few milligrams of solid until it glows, which would soften or crack a thin test tube. The ignition tube is short and narrow, usually with a thicker wall, so a small sample can be heated directly in a Bunsen flame. Being small, it heats quickly, uses very little material and is normally treated as a consumable.

Its most familiar job is Lassaigne’s sodium fusion test for nitrogen, sulfur and halogens in organic compounds. A small piece of sodium and a little of the compound are heated together in the tube until red hot, and the hot tube is plunged into distilled water in a china dish, where it shatters. The solution, filtered from glass and charcoal, is then tested with the usual reagents for cyanide, sulfide and halide ions.

In inorganic salt analysis the same tubes are used for dry heating tests. A salt heated alone may give off water vapour, oxygen, carbon dioxide or coloured gases, or change colour, and these observations point towards the ions present.

Specifications

Item Ignition (fusion) tube, small and usually thick-walled
Heating Directly in a Bunsen flame
Sample size A few milligrams of solid
Main uses Sodium fusion test and dry heating tests

Applications

  • Lassaigne’s sodium fusion test for nitrogen, sulfur and halogens in organic compounds
  • Dry heating tests on inorganic salts during salt analysis practicals
  • Observing sublimation of ammonium chloride or iodine in a small, easily handled tube

Care & Handling

  • Wear eye protection and use a safety screen for sodium fusion; the tube is meant to break in water and fragments can fly.
  • Warm the tube gradually before heating it strongly, so it does not crack from sudden expansion.
  • Discard used and broken tubes in a glass-waste container, since fused residues rarely clean out.
  • Store sodium metal under paraffin oil and cut only small pieces with a dry knife.

Why Choose LabEquip

Ignition tubes are used up quickly in school and college qualitative analysis, so laboratories order them in bulk before practical sessions. LabEquip lists them in the chemistry lab equipment range next to the larger combustion tube for strong heating in a gas stream; send quantities through the contact page.

Related Products

  • Fusion Tube: A fusion tube listed for Lassaigne’s sodium fusion test, the same job as this ignition tube.
  • Metal Test Tube Holder: A metal spring-action holder for gripping the small tube in the flame.
  • Evaporating Dish, Round Form: A round porcelain evaporating dish to hold the distilled water the hot tube is plunged into.
  • Tube, Combustion: A combustion tube for heating larger solid samples in a gas stream.

Frequently Asked Questions

What is the difference between an ignition tube and a test tube?

An ignition tube is short, narrow and usually thick-walled, made for heating a few milligrams of solid strongly in a flame. An ordinary test tube has thinner walls and is used for solutions and gentle heating.

Why is the ignition tube broken in Lassaigne’s test?

After the compound and sodium are fused, the red-hot tube is plunged into distilled water in a china dish so it shatters. That releases the fused material into the water at once and destroys any leftover sodium, giving the extract that is filtered and tested.

Is the sodium fusion test suitable for students?

It is used with senior students under close supervision, because sodium reacts violently with water and the tube shatters. Use a small piece of sodium, eye protection and a safety screen, and keep the dish of water well away from other reagents.

What can heating a salt in an ignition tube show?

Dry heating shows whether a salt gives off water of crystallisation, which condenses on the cool upper part of the tube, changes colour, melts or releases a gas that can be tested at the mouth of the tube.

Can ignition tubes be reused?

They are normally treated as consumables. Tubes used in sodium fusion are broken on purpose, and tubes used for strong heating often crack or become stained, so a fresh tube is used each time.

Why does a sodium fusion extract sometimes give no result?

The usual causes are too little sodium, a tube that was not heated to red heat for long enough, or a compound that escaped before it reacted. Repeat with fresh sodium and heat the tube steadily before plunging it into water.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)