Search

In Stock

Stoppers, Glass

Standardized 1:10 Taper Precision: Manufactured with CNC-ground surfaces to ensure universal interchangeability and a high-vacuum matte finish that prevents joint seizing while maintaining airtight integrity across standardized sockets.

Ergonomic Penny-Head or Hexagonal Design: Specifically engineered to provide a secure grip for safe handling and to prevent the stopper from rolling off benchtop surfaces, reducing the risk of laboratory contamination or breakage.

$1.47

Quick Answer: Glass stoppers are ground-glass plugs that close the necks of flasks, the unused openings of multi-neck apparatus and the mouths of reagent bottles. The ground surface seals against a matching socket, giving a closure that resists most solvents and reagents.

Which Kind of Stopper

Two families share the name. Interchangeable stoppers have a cone ground to a standard joint size, so they fit any socket of that size: flask necks, side necks of multi-neck flasks and adapters, and the tops of separating and dropping funnels. Bottle stoppers are ground to fit one particular bottle neck and may not seal in another bottle of the same nominal size.

Glass is chosen where a plastic or rubber stopper would be attacked or would contaminate the contents: concentrated acids, halogenated solvents, bromine and iodine solutions and most organic liquids. Hexagonal or flat heads stop a stopper rolling off the bench. The limitation is alkali: sodium and potassium hydroxide solutions attack the ground surfaces and can cement a glass stopper into its neck, which is why alkali bottles are closed with plastic stoppers or rubber bungs.

A hollow stopper puts less load on a thin neck, while a solid one survives knocks better. For ground-joint apparatus, choose the stopper by joint size exactly as for any other fitting.

Care & Handling

  • Store stoppers in a separate compartment or tied to their bottle, as ground surfaces scratch against each other.
  • Wipe the ground zone clean before inserting; a grain of solid on the joint stops it seating and can crack the neck when pushed.
  • Keep a stopper with the bottle it was ground to, and mark matched pairs with a glass marker.

Specifications

Material Glass with a ground sealing surface
Suited to Acids, organic solvents, halogen solutions
Not suited to Strong alkali solutions, which cause seizing

Applications

  • Closing unused necks on multi-neck flasks during reactions
  • Stoppering ground-necked conical and round-bottomed flasks during mixing or storage
  • Closing reagent bottles that hold acids, solvents or halogen solutions
  • Closing the top of a dropping or separating funnel

Why Choose LabEquip

Chemistry stores and teaching labs replace lost or broken stoppers regularly, and ordering by joint size keeps flasks and funnels in service. LabEquip lists glass stoppers in its chemistry lab equipment range; state sizes and quantities on the contact page.

Related Products

Frequently Asked Questions

Will an interchangeable glass stopper fit any flask?

An interchangeable glass stopper fits any socket of the same standard joint size, whether on a flask neck, a side neck or a funnel. Bottle stoppers are different: they are ground to fit one bottle and may not seal in another of the same nominal size.

Why do glass stoppers stick in bottles of alkali?

Sodium and potassium hydroxide solutions slowly attack glass, and the solution creeping into the joint dries to carbonate that cements the stopper in place. Store alkalis in bottles with rubber or plastic closures instead.

How can a stuck glass stopper be freed safely?

Wear eye protection and gloves, then run warm water over the neck so it expands slightly, and tap the stopper gently with a wooden rod. Twisting with steady pressure often frees it. Never use force or a flame on a bottle that holds a flammable or corrosive liquid.

Should glass stoppers be greased?

A thin film of grease helps a stopper seal under vacuum and stops it seizing during long storage. For analytical work, where grease could contaminate the contents, use the stopper dry or with a PTFE sleeve.

What is the advantage of a hollow glass stopper?

Hollow stoppers are lighter, so they put less load on a funnel or flask neck, and their thinner walls heat evenly, which lowers the risk of cracking. Solid stoppers are heavier and stay put by their own weight.

Can a glass stopper be fitted into a hot flask?

No. As the flask cools, the gas inside contracts and pulls the stopper in so tightly that it may not come out, and heating a stoppered flask builds pressure. Let the flask cool to room temperature before stoppering it.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)