Search

In Stock

Receiver Adapter, Multi-Limb Vacuum

Rotating Distribution Geometry: Engineered with three or four precision-aligned delivery limbs that allow for sequential distribution of distillates into individual receiver flasks via a centralized manifold system.

Integral Vacuum Manifold: Features a reinforced, serrated side-arm connection designed for airtight coupling with heavy-duty vacuum pump systems, ensuring stable internal pressure levels during volatile solvent recovery.

$5.87

Quick Answer: A multi-limb vacuum receiver adapter, often called a cow or pig, is a glass fitting with one joint for the condenser, a vacuum side tube and several delivery limbs, each carrying its own receiving flask. Turning it on its joint moves the drip from one flask to the next, so fractions are collected under reduced pressure without admitting air.

Changing Fractions Without Breaking the Vacuum

With an ordinary vacuum adapter, every change of receiver means removing the heat, letting air into the apparatus and pumping it down again, which interrupts the boiling and can expose a hot product to oxygen. The multi-limb pattern avoids this. The adapter hangs from the condenser outlet on a greased joint, and its body carries the vacuum connection and a fan of limbs. Rotating the body a fraction of a turn lines a different limb up under the drip point, so the fore-run, the main fraction and the tail each go to a separate flask while the pressure stays steady.

Because the whole assembly turns on one joint, that joint carries the weight of every flask and must be greased well enough to rotate smoothly under vacuum. Small receivers, each held with a joint clip, keep the load manageable.

Applications

  • Fractional distillation under reduced pressure in organic synthesis and postgraduate labs
  • Separating a low-boiling fore-run from the main product without letting air in
  • Purifying heat-sensitive or air-sensitive liquids where re-evacuation would disturb the boiling
  • Collecting samples at different head temperatures for analysis by refractive index or gas chromatography

Specifications

Type Multi-limb (cow) vacuum receiver adapter
Condenser end Ground joint on which the adapter rotates
Vacuum Side tube for vacuum tubing
Limbs Several delivery limbs, one receiver each

Care & Handling

  • Grease the rotating joint with vacuum grease and turn it slowly; a dry or stiff joint can twist and snap the condenser outlet.
  • Fit a clip to every receiver so no flask can drop when the adapter is turned.
  • Label the receivers before the run and note the head temperature at each change.
  • Release the vacuum only after the boiling flask has cooled, then remove the receivers one at a time.

Why Choose LabEquip

Research groups and advanced teaching labs that purify liquids by vacuum fractional distillation use a cow adapter to keep runs continuous. LabEquip lists it with its chemistry lab equipment and offers the complete vacuum distillation assembly; share your condenser joint size and preferred limb count on the contact page.

Related Products

Frequently Asked Questions

Why is a multi-limb receiver adapter called a cow or pig?

With its rounded body and several delivery limbs pointing downwards, the fitting looks a little like an udder or the underside of an animal, which gave it the laboratory nicknames cow and pig. The names describe the same multi-limb vacuum receiver adapter.

How many fractions can a multi-limb adapter collect?

One fraction per limb, each into its own receiving flask. Three and four limbs are the common patterns, giving a fore-run, one or two main fractions and a tail. Plan the number of fractions before choosing the adapter.

Do I need to break the vacuum to change flasks on a cow adapter?

No, that is its main advantage. The adapter turns on its greased joint at the condenser outlet, so rotating it lines a different limb up under the drip. The pressure stays steady and the hot product is not exposed to air between fractions.

What grease should be used on the rotating joint of a cow adapter?

Use a thin film of vacuum grease on the upper part of the cone, so the joint seals under reduced pressure and still turns smoothly. Too much grease spreads into the distillate; too little lets the joint leak and makes it stiff to rotate.

What receiving flasks suit a multi-limb vacuum adapter?

Small round-bottomed or pear-shaped flasks of similar size, which are safe under vacuum and light enough not to strain the limbs. Support the flasks from below or clamp the assembly, since several filling flasks add weight to one rotating joint.

When should a cow adapter be turned to the next flask?

Turn it when the still-head temperature shows that one fraction has finished, usually a rise after a steady plateau. Rotate smoothly and briefly, so the drip moves cleanly from one limb to the next without spilling between them.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)