Quick Answer: A reagent bottle with screw cap is a laboratory storage bottle closed by a threaded cap instead of a ground-glass stopper. It holds prepared solutions, buffers and stock reagents with a closure that stays put when the bottle is carried, shaken or kept for weeks.
How a Threaded Closure Changes Reagent Storage
A reagent bottle with screw cap solves a problem that stoppered bottles leave open. A push-in stopper can lift when a bottle is tipped, and a ground-glass stopper can freeze in its neck. A threaded cap is tightened by hand and released by hand, so the bottle can travel from the preparation room to a class bench, or be shaken to mix its contents, without the closure working loose.
Caps on laboratory bottles of this kind are normally plastic, and many carry a liner or a drip-free pouring ring.
In teaching and research laboratories the screw-cap bottle is usually the working container for anything made up in bulk and used over several sessions: buffer solutions, standardised acids and alkalis, indicator solutions and culture media. A clear label with name, concentration, date and initials turns it into a traceable stock rather than an anonymous jar.
Specifications
| Item | Reagent bottle with a threaded screw cap |
| Intended use | Storage and transport of prepared solutions and stock reagents |
| Typical contents | Buffers, standard solutions, indicators, culture media |
Applications
- Keeping standardised sodium hydroxide or hydrochloric acid for a run of titration practicals
- Storing the buffer solutions used to calibrate pH meters
- Holding prepared media or rinsing solutions in microbiology and biochemistry work
- Sending measured reagents from a central preparation room to several laboratories
Care & Handling
- Before autoclaving any screw-cap bottle, loosen the cap by about a turn; a tightly closed bottle heated in steam can build pressure and crack.
- Wipe the thread clean before closing, since dried salt or syrupy residue on the thread makes the cap stick and stops it sealing.
- Check caps and liners from time to time for cracking or swelling, especially where solvents or strong oxidisers are stored.
- Keep heavy filled bottles on low shelves with the label facing outwards.
Why Choose LabEquip
Laboratory technicians and school preparation rooms order screw-cap bottles when a solution is made once and used for weeks. LabEquip lists this bottle in its chemistry lab equipment range together with stoppered patterns such as the narrow mouth reagent bottle; tell us the capacities and quantities you need through the LabEquip contact page.
Related Products
- Laboratory Storage Bottle with Screw Cap: A glass laboratory storage bottle with screw cap for reagents and prepared solutions.
- Narrow Mouth Bottle, Plastic: A plastic narrow mouth bottle with screw cap for buffers, standards and water samples.
- Reagent Bottle, Narrow Mouth: A stoppered narrow mouth reagent bottle for bench reagents that are poured often.
- Specimen/Culture Jar/Bottle with Plastic Screw Cap: A clear glass jar with plastic screw cap for specimens, culture media and samples.
Frequently Asked Questions
When should I choose a screw cap reagent bottle instead of a stoppered one?
Choose a screw cap when the bottle will be carried, shaken or kept for weeks. A threaded cap is tightened and released by hand and stays put if the bottle is tipped, while a push-in stopper can lift and a ground-glass stopper can seize in the neck.
Can a screw cap reagent bottle be autoclaved?
That depends on both the bottle and the cap material, and the cap usually sets the limit. Where both are rated for autoclaving, loosen the cap by about a turn before the cycle so pressure can equalise, and tighten it only after the bottle has cooled.
Are screw caps suitable for bottles of organic solvents?
Some cap plastics and liners soften or swell with certain organic solvents, so the cap must suit the solvent. Caps with a chemically resistant liner, such as PTFE-faced liners, are generally used for solvents. Check the cap for swelling or cracking each time the bottle is opened.
How full should a stock solution bottle be filled?
Leave a small air space below the cap so the liquid can expand with temperature and the bottle can be shaken to mix. Filling to the shoulder is a common rule. Overfilled bottles can leak at the cap or crack if they are warmed.
Why does stored sodium hydroxide solution change strength?
Sodium hydroxide absorbs carbon dioxide from the air each time the bottle is opened, forming sodium carbonate and lowering the hydroxide concentration. For titrations, keep the bottle tightly capped and standardise the solution again before use if it has been stored for some time.
What should go on the label of a stock solution bottle?
Give the name of the substance, its concentration, the date it was made, the initials of the person who made it and any hazard symbols. Write in permanent ink, and add an expiry date for solutions that do not keep, such as starch indicator.
Last Updated: November 2026










Reviews
There are no reviews yet.