Quick Answer: A wide mouth reagent bottle is a laboratory storage bottle with a broad neck, used for solids such as powders, crystals, granules and pellets that are taken out with a spatula or scoop. The wide opening also makes the bottle easy to fill and to clean.
Specifications
| Item | Reagent bottle with a wide neck for solids |
| Access | Spatula or scoop reaches the contents directly |
| Typical contents | Powders, crystals, granules, pellets, small specimens |
| Related listing | Clear-glass wide mouth version listed separately |
Built Around the Spatula
Solid reagents cannot be poured accurately through a narrow neck, and tapping a bottle to shake out crystals wastes material and spreads dust. A wide mouth reagent bottle lets a spatula or scoop reach inside, so marble chips, copper(II) sulfate crystals, zinc granules or sodium chloride can be taken out in measured amounts while the rest stays undisturbed.
LabEquip lists a clear-glass version separately as the Reagent Bottle, Wide Mouth (Clear Glass), and this listing may cover other materials such as polypropylene, so confirm the material when ordering. Polypropylene is light, does not shatter when dropped and resists most aqueous acids and alkalis, which makes it a common choice for solids handled by students.
The drawback of a broad opening is exposure to air each time the bottle is opened. Hygroscopic solids such as sodium hydroxide pellets and anhydrous calcium chloride take up moisture quickly, so they should be scooped out promptly and the bottle closed straight away.
Applications
- Storing granular and crystalline salts for preparation and analysis practicals
- Keeping metal granules, turnings or marble chips for rates-of-reaction experiments
- Holding sodium hydroxide pellets or drying agents under a well-closed lid
- Carrying soil or rock samples back from fieldwork, when a plastic version is supplied
Care & Handling
- Use a clean, dry spatula for each reagent; a damp spatula starts caking inside the bottle.
- Wipe powder from the rim and neck before closing so the closure seats properly.
- If a plastic version is supplied, keep it away from heat sources and check compatibility before storing organic solvents or strong oxidisers in it.
- Break up caked solids gently with a glass rod rather than by knocking the bottle on the bench.
Why Choose LabEquip
Laboratory stores managers and chemistry teachers order wide-mouth bottles to decant bulk solids into smaller, labelled bench quantities. LabEquip carries them in the chemistry lab equipment range with bottles for liquids such as the Reagent Bottle, Narrow Mouth; send the material and sizes you need through the contact page.
Related Products
- Reagent Bottle, Wide Mouth (Clear Glass): The clear glass wide mouth version, which lets the condition of a solid be checked without opening.
- Reagent Bottle (Wide Mouth), Plastic: A white HDPE wide mouth bottle for solids such as sodium hydroxide pellets that are better kept in plastic.
- Reagent Bottles (Wide Mouth) – Amber: An amber wide mouth bottle for light-sensitive solids such as silver salts.
- Wide Mouth Square Bottle, Plastic: A square plastic wide mouth bottle that packs closely on a shelf and gives flat faces for labels.
- Reagent Bottle, Narrow Mouth: The narrow mouth reagent bottle for liquids that are poured rather than scooped.
Frequently Asked Questions
Why are solid chemicals kept in wide mouth bottles?
Solids cannot be poured accurately through a narrow neck, and tapping a bottle to shake crystals out wastes material and spreads dust. A wide mouth reagent bottle lets a spatula or scoop reach inside, so marble chips, copper(II) sulfate crystals or zinc granules can be taken out in measured amounts.
Is plastic or glass better for a wide mouth reagent bottle?
Plastic is light, does not shatter and resists most aqueous solids and alkalis, which suits student use. Glass does not absorb odours or stains and is better for organic solids and substances such as iodine that interact with plastic. Choose by what the bottle will hold.
Why do sodium hydroxide pellets in a bottle turn wet?
Sodium hydroxide is deliquescent: it absorbs water and carbon dioxide from the air until the pellets become wet and stuck together. Keep the bottle tightly closed, open it only briefly, and buy in smaller bottles so the stock is used before it spoils.
How should solid reagents be dispensed in a school lab?
Use a clean, dry spatula for each reagent, take the solid onto weighing paper or into a small beaker, and close the bottle straight away. Never return unused solid to the stock bottle. For a class, it is often easier to dispense small labelled portions in advance.
Can a wide mouth reagent bottle hold biological specimens?
Yes, a wide opening makes it easy to put specimens in and take them out, and such bottles are often used for preserved material. Choose a closure that seals well against the preservative, and label the bottle with the specimen, preservative and date.
Why does the lid of a solids bottle stick after a few weeks?
Fine powder in the thread or on the stopper can cake when it picks up moisture, gluing the closure in place. Wipe the neck and thread clean before closing, and store hygroscopic solids in a dry cupboard or a desiccator.
Last Updated: November 2026










Reviews
There are no reviews yet.