Search

In Stock

Pneumatic Trough, Plastic

Industrial-Grade Polypropylene Construction: Fabricated from high-impact, chemically inert plastic that resists cracking and thermal stress, ensuring long-term structural integrity and zero leakage during prolonged immersion.

Integrated Support Architecture: Features a reinforced internal floor designed to securely accommodate beehive shelves and gas jars, facilitating stable gas delivery without accidental container shifting during sensitive volumetric displacement.

$3.38

Quick Answer: A plastic pneumatic trough is a water-filled plastic basin in which gases are gathered by pushing water out of an upturned vessel. A gas jar, test tube or measuring cylinder is filled with water and stood mouth-down in it, and gas entering from a delivery tube rises into the vessel, so the amount collected can be seen.

Why Plastic Suits a Gas-Collection Trough

A pneumatic trough is filled with water, carried to the sink and back, and knocked against glass jars and cylinders throughout a practical. A plastic trough is light when empty, will not shatter if dropped, and is less likely to chip the rims of gas jars stood in it.

The collecting method is the same as in any trough. Hydrogen, oxygen and nitrogen, which dissolve very little, are collected efficiently; carbon dioxide dissolves somewhat, so a little is lost. The trough also becomes a simple measuring system: a measuring cylinder full of water, inverted and clamped in the trough, shows the volume of gas produced at intervals, which is how many schools follow the rate of reaction between magnesium and hydrochloric acid.

Compare the pneumatic trough listed without a stated material, and the gas jar with ground flange and foot used to collect and store the gas.

Applications

  • Collecting oxygen from hydrogen peroxide with a manganese(IV) oxide catalyst and testing it with a glowing splint
  • Measuring the hydrogen given off by magnesium and dilute acid over time, to plot a rate curve
  • Collecting hydrogen for the squeaky pop test in lower secondary lessons
  • Measuring oxygen released by pondweed in light, in biology practicals on photosynthesis

Specifications

Item Trough for collecting gas over water
Material Plastic, per the listing title
Method Displacement of water from an inverted vessel
Suits gases Hydrogen, oxygen and other gases that dissolve poorly in water

Care & Handling

  • Fill the trough only to a depth that covers the mouth of the inverted vessel, leaving room for the water it displaces.
  • Keep hot delivery tubes and burners away from the plastic, which can soften or distort with heat.
  • Empty and dry the trough after use so algae and limescale do not build up.
  • Clean with a soft cloth and mild detergent rather than abrasive powders, which scratch plastic.

Why Choose LabEquip

Schools that run gas-preparation and rate practicals for whole classes often want a plastic pneumatic trough on every bench, because it survives daily handling. LabEquip stocks them in the chemistry lab equipment category; give the number of benches to equip on the contact page.

Related Products

  • Pneumatic Trough: A pneumatic trough for gas collection over water whose material is not named, for labs comparing trough options.
  • Beehive Shelves: Beehive shelves for supporting inverted jars in the trough over the delivery tube.
  • Specimen Jar (Gas Jar), Plastic: A plastic gas jar that suits collecting gas in a plastic trough without breakage.
  • Cylinder, Measuring: A glass measuring cylinder to invert in the trough for measuring the volume of gas produced.
  • Tubes, Delivery: Glass delivery tubes bent to reach under the jar or cylinder in the trough.

Frequently Asked Questions

Is a plastic pneumatic trough as good as a glass one?

For collecting gases over water it works the same way. A plastic pneumatic trough is light when empty, will not shatter if dropped and is less likely to chip the rims of gas jars, which suits busy school practicals. Glass troughs are clearer for viewing from the side.

How can the volume of gas be measured with a plastic trough?

Fill a measuring cylinder with water, invert it in the trough and lead the delivery tube under its mouth. Read the volume once the reaction stops, after raising or lowering the cylinder until the inside and outside water levels match.

Can carbon dioxide be collected in a plastic trough?

Yes, though some carbon dioxide dissolves in the water, so a little is lost. For a measured volume, collecting over warm water or using a gas syringe reduces the loss; for simple test jars, collection over water is fine.

Which gases should not be collected over water in the trough?

Gases that dissolve readily in water, such as ammonia, hydrogen chloride and sulfur dioxide, cannot be collected this way. They are collected by upward or downward delivery into dry jars, or in a gas syringe.

Why should the water levels inside and outside the cylinder be equal?

When the levels match, the gas in the cylinder is at atmospheric pressure. If the water inside is higher than outside, the gas is below atmospheric pressure and its volume reads high; if lower, the gas is compressed and its volume reads low.

How should a plastic trough be cleaned between lessons?

Empty it, rinse with tap water and wipe away any limescale or residue with a soft cloth and mild detergent. Avoid abrasive pads that scratch plastic, and dry it upside down so water does not stand in it.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)