Quick Answer: The clear acrylic overflow can is a transparent displacement vessel with a short side spout near the rim and a printed volume scale. Because the wall is clear, students can watch the water level and the immersed object while the displaced water runs from the spout into a measuring cylinder or beaker.
Seeing Displacement Happen
An overflow can works on a simple rule: once it is full to the spout, any object lowered in pushes out its own volume of water. In a metal can that happens out of sight. The acrylic version, shown in the listing photo as a transparent cylinder with a tube-like spout near the top and graduations on its side, lets the class see the object go under, the level reach the spout and the water begin to run.
That visibility helps when teaching the method itself. Students can see why the can must be filled until it overflows and then left to stop dripping, why an object must be fully submerged to displace its whole volume, and how a floating object settles only until it has displaced its own weight of water. The printed scale gives a quick visual check of the level, but the displaced volume is measured in a measuring cylinder.
Acrylic is lighter than metal and will not dent, although it scratches more easily and must not be used with hot water or solvents. For weighing displaced water directly with a spring balance, the metal overflow can and bucket set is the better choice; the density cube set supplies regular solids to test.
Specifications
| Item | Transparent overflow (displacement) can |
| Material | Clear acrylic, as stated in the title |
| Spout | Short side spout near the rim (photo) |
| Scale | Printed volume graduations on the wall (photo) |
Care & Handling
- Fill the clear acrylic overflow can with cold or lukewarm water only, as hot water can distort acrylic.
- Clean with water, mild detergent and a soft cloth; solvents and abrasive pads craze or scratch the plastic.
- Lower heavy or sharp objects on a thread so they do not crack the base.
- Dry the can and store it upright where it will not be knocked over.
Applications
- Measuring the volume of stones, keys and other irregular solids by displacement
- Showing why a floating object displaces less water than a sunken object of the same size
- Density practicals pairing displacement volume with mass from a balance
- Demonstrations shown on a visualiser, where the whole class must see the water level
Why Choose LabEquip
Primary and lower-secondary teachers introducing displacement and floating choose the clear overflow can because students can see every stage. LabEquip lists it with its chemistry lab equipment; class quantities can be requested on the contact page.
Related Products
- Overflow Can and Bucket Set: A metal overflow can with its own catch bucket, for weighing the displaced water directly.
- Overflow Vessel (Eureka Can), Metal: A metal eureka can that suits warm water and heavier objects that acrylic should not take.
- Cylinder, Measuring: A glass measuring cylinder for collecting the overflow and reading the displaced volume accurately.
- Density Blocks: Density blocks whose volume can be found by displacement and compared with ruler measurements.
- Archimedes Principle Kit: An Archimedes principle kit with spring balance and sinker, for extending displacement into upthrust.
Frequently Asked Questions
Why choose a clear acrylic overflow can instead of a metal one?
In a metal can the displacement happens out of sight. The clear acrylic overflow can lets students watch the object go under, the level reach the spout and the water start to run, which helps them understand why each step of the method matters.
How do I get an accurate displacement reading with the acrylic can?
Fill above the spout, let the can drain until it stops dripping and place a dry measuring cylinder under the spout. Lower the object slowly on a thread until fully submerged without touching the walls, wait for the last drip and read the cylinder at eye level.
Can the printed scale on the acrylic can replace a measuring cylinder?
The printed graduations on the wall give a quick visual estimate of the water level, useful for showing that the level rises. For a measured volume, collect the overflow in a measuring cylinder, which has finer graduations and gives a more accurate reading.
Can hot water or solvents be used in an acrylic overflow can?
Keep to cold or room-temperature water. Acrylic softens at moderate temperatures and can craze or crack with hot water, alcohol or other solvents. For warm liquids use a metal displacement can.
How should an acrylic overflow can be cleaned?
Rinse it with water and a mild detergent, then dry it with a soft cloth. Avoid abrasive pads, which scratch the clear wall, and avoid alcohol or acetone, which can cause fine cracks in acrylic.
Why does a floating object push out less water than its volume?
A floating object sinks only until the water it displaces weighs the same as the object. Part of its volume stays above the surface, so the overflow is less than its full volume; pushing it fully under adds the rest.
Last Updated: November 2026










Reviews
There are no reviews yet.