Search

In Stock

Overflow Can and Bucket Set

$8.85

Quick Answer: The overflow can and bucket set is a metal displacement can with a side spout plus a small catch bucket with a handle. The overflow can and bucket are used together to collect and weigh the water an object pushes aside, the key measurement in experiments on Archimedes’ principle.

Verifying Archimedes’ Principle Step by Step

The listing photo shows two bright metal pieces: a cylindrical can with a short spout near the rim, and a smaller open bucket with a wire handle. The can is filled until water just runs from the spout and then left to finish dripping. Anything lowered in afterwards pushes out its own volume of water, and the spout delivers that water straight into the waiting bucket.

The classic procedure uses a spring balance. Weigh the object in air, then lower it, still hanging from the balance, into the full can and read the balance again: the reading drops. Weigh the bucket empty and again with the displaced water. The loss in weight of the object and the weight of water collected come out equal, which is Archimedes’ principle: the upthrust on an immersed body equals the weight of fluid it displaces.

The bucket’s handle lets it hang from a balance hook itself, so the displaced water can be weighed without pouring it into another container and losing drops. The transparent acrylic overflow can lets students watch the water level instead, and the equal volume metal cylinders show that objects of the same volume receive the same upthrust.

Specifications

Items Overflow (displacement) can and catch bucket (photo)
Can Cylindrical metal can with side spout near the rim (photo)
Bucket Small open metal bucket with wire handle (photo)
Finish Bright metal, as photographed

Applications

  • Verifying Archimedes’ principle with a spring balance and a solid hung on a thread
  • Finding the volume of irregular objects such as stones from the water they displace
  • Comparing the upthrust on one object in tap water and in salt solution
  • Showing that a floating object displaces its own weight of water

Care & Handling

  • Stand the overflow can on a level surface and wait for the spout to stop dripping before each measurement.
  • Lower objects slowly on a thread so that water does not splash over the rim.
  • Dry the can and bucket after use to prevent water marks and corrosion at the seams.
  • Protect the spout from knocks; a bent spout drips unevenly and spoils readings.

Why Choose LabEquip

Physics and general science teachers covering buoyancy and density buy the overflow can with its bucket so that the displaced water can be weighed directly. It appears in LabEquip’s chemistry lab equipment listings; ask on the contact page about sizes and class quantities.

Related Products

Frequently Asked Questions

How are the overflow can and bucket used together?

The overflow can is filled until water runs from its side spout and then left to stop dripping. When an object is lowered in, the water it pushes aside flows out of the spout into the small bucket, which is weighed before and after to find the weight of water displaced.

How does the overflow can and bucket set verify Archimedes’ principle?

Weigh the object in air on a spring balance, then again while it hangs fully under water in the full can; the reading falls by the upthrust. Weigh the bucket with the displaced water and subtract the empty bucket. The two results should be equal: upthrust equals the weight of liquid displaced.

Why must the can be filled to the spout and left to drip first?

The method assumes that every drop leaving the spout was pushed out by the object. If the can is below the spout, the first part of the displacement only raises the level; if it is still dripping, extra water is collected. Both make the result wrong.

Why are my upthrust and displaced-water weights not quite equal?

Small differences come from drops clinging to the spout or the bucket, water splashing when the object enters, the object touching the can wall, and air bubbles stuck to the object. Lower it slowly on a thread, tap the spout to release the last drop and repeat the test.

Can the overflow can measure the volume of an irregular stone?

Yes. Collect the overflow in a measuring cylinder instead of weighing it; the volume of water collected equals the volume of the stone. Dividing the stone’s mass by that volume gives its density.

What happens with an object that floats in the overflow can?

A floating object displaces water equal to its own weight, not its own volume. If it floats freely, the water collected in the bucket should weigh the same as the object, which shows the law of flotation.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)