Quick Answer: This listing covers a clear glass flask with either a round or a flat bottom, both with a spherical body and a narrow neck. The round or flat bottom flask is used for gentle heating, preparing gases, dissolving solids and holding solutions in school and college laboratories.
Choosing Between the Two Bases
One listing covers both base shapes, so the choice belongs to the buyer. A round base is the stronger shape and heats most evenly, but it cannot stand alone and must sit in a cork ring, a heating mantle or a clamp. A flat base stands on the bench, a gauze or a hot plate, which suits simple set-ups in school practicals, but it is weaker and must never be put under vacuum.
The title specifies clear glass without naming the composition. Clear glass flasks sold alongside borosilicate ones are usually the ordinary soda-lime type, well suited to observation, storage, solution making and mild warming, but less tolerant of sudden temperature changes than borosilicate. For reflux, distillation or strong heating, compare the boiling flasks listed as round bottom and flat bottom, and confirm the glass type of whichever listing you choose.
State the base shape, capacity and neck form when ordering, since none of these is fixed in the listing.
Specifications
| Options in this listing | Round bottom or flat bottom |
| Material | Clear glass, as named in the title; composition not stated |
| Round base | Needs a cork ring, mantle or clamp; strongest under heat and pressure difference |
| Flat base | Stands unsupported; not for vacuum |
Applications
- Gas generation in school practicals, with a flat bottom flask standing on the bench and acid added through a funnel
- Showing the expansion of a heated liquid, using a flask of coloured water with a bung and a narrow glass tube
- The ammonia fountain experiment, which uses a dry round bottom flask inverted on a stand
- Holding and swirling solutions during preparation, where the narrow neck limits splashing
Care & Handling
- Warm clear glass gradually over a gauze, never in a direct flame, and let it cool in air.
- Keep round bottom flasks in cork rings, both on the shelf and on the bench.
- Never connect a flat bottom flask to a vacuum pump, and do not evacuate even a round one if the glass shows scratches.
- Clean with a curved bottle brush and warm detergent, then rinse with distilled water.
Why Choose LabEquip
Schools that mainly need flasks for demonstrations, gas preparation and solution work often choose clear glass for everyday classes. LabEquip lists both base shapes under this chemistry lab equipment listing; say which shape and size you need through the contact page.
Related Products
- Flask, Boiling, Round Bottom: A round bottom boiling flask for strong heating and reflux, where the clear glass version is better kept for mild work.
- Flask, Boiling, Flat Bottom: A flat bottom boiling flask that stands on its own on a gauze or hot plate during gentle heating.
- Flask Stand, Plastic: A stepped plastic ring stand that keeps a round bottom flask upright on the bench without a clamp.
- Brush, Erlenmeyer (Conical)/ Round Bottom/ Flat Bottom Flask: A bendable flask brush made to reach the curved base of round and flat bottom flasks through the neck.
- Round Bottom Flask 250ml: A 250 ml round bottom flask listed with its capacity, for set-ups that need a known flask size.
Frequently Asked Questions
Should I choose a round bottom or a flat bottom flask?
Choose round bottom for strong heating, boiling and anything under reduced pressure, because the sphere spreads heat and stress evenly. Choose flat bottom when the flask must stand on the bench, a gauze or a hot plate for mild warming, storing or making up solutions. This listing covers both base shapes in clear glass.
Is a clear glass flask the same as a borosilicate flask?
Not necessarily. Clear glass describes appearance, not composition, and clear flasks sold beside borosilicate ones are often soda-lime glass. Soda-lime glass is fine for observation, storage and gentle warming but copes less well with sudden temperature changes, so strong heating and reflux are better done in borosilicate boiling flasks.
How do you set up the fountain experiment with a round bottom flask?
Fill a dry round bottom flask with a very soluble gas such as ammonia, close it with a bung carrying a jet tube, and dip the tube into water containing indicator. When a little water is squirted in, the gas dissolves, pressure inside drops and water sprays up into the flask as a coloured fountain. The round flask is used because it withstands the pressure difference.
Can a flat bottom flask stand directly on a hot plate?
Yes, the flat base sits on a hot plate or gauze, which is its main advantage. Warm it gradually from cold, keep liquid in it while heating and never heat it empty. For long boiling or high temperatures a round bottom flask in a heating mantle is the safer choice.
Why must a flat bottom flask never be put under vacuum?
A flat base has a sharp change of curvature where it meets the body, and that edge concentrates stress. Under vacuum the atmosphere presses equally on the whole outside, and the flat base is the weak point where the flask can implode. Round flasks, with no flat panels, share the load evenly.
How do I keep a round bottom flask upright on the bench?
A round bottom flask cannot stand on its own, so rest it in a cork ring, a stepped plastic or silicone flask stand, or a heating mantle, or clamp it by the neck. Never leave it balanced on its base, since it rolls easily and a full flask can tip and break.
Last Updated: November 2026










Reviews
There are no reviews yet.