Search

In Stock

Flask, Retort (Stoppered)

Hermetic Ground-Glass Interface: Equipped with a precision-ground interchangeable stopper that provides a leak-proof seal at the charging port, effectively preventing the escape of volatile or hazardous vapors during thermal processing.

Thermal Shock Resistance: Fabricated from low-expansion borosilicate 3.3 glass, engineered to withstand high-intensity heat and rapid temperature fluctuations without compromising the structural integrity of the elongated sidearm.

$7.33

Quick Answer: A stoppered retort is a round glass vessel with a long neck bent downwards, plus a stoppered opening, called a tubulure, on top of the bulb. The retort flask is used for simple distillation and for heating solids so that the vapour runs down the neck into a receiver.

An Old Design That Still Teaches Distillation

The retort is one of the oldest pieces of chemical glassware, used by alchemists and early chemists long before the water-cooled condenser. The bulb and its downward-sloping neck do the work of a flask, still head and air condenser in one piece: vapour rises from the heated bulb, turns into the neck, cools as it travels, and drips from the tip into a receiver, which can be stood in cold water.

In the stoppered version a second opening on top of the bulb is closed with a ground stopper. It lets reagents be added or a thermometer be inserted without dismantling the set-up, and it makes the retort easier to fill and clean than the plain type, which can only be charged through its long neck.

Retorts are now used mainly for demonstrations and history-of-science lessons, since a distillation flask with a water condenser gives cleaner separation and better temperature control. They remain useful for showing the dry distillation of wood, which gives off flammable gas, tarry liquid and water and leaves charcoal behind.

Care & Handling

  • Clamp the retort by the neck close to the bulb and support the bulb on a gauze; the long neck makes it front-heavy.
  • Heat gently and move the flame around the bulb, because a concentrated hot spot can crack the glass.
  • Make sure the neck tip opens freely into the receiver; heating a retort with a blocked or sealed outlet would build dangerous pressure.
  • Store with a slip of paper between the stopper and its socket so the ground surfaces do not seize.

Applications

  • Demonstrating simple distillation of water from a coloured solution in lessons on separating mixtures
  • Dry (destructive) distillation of wood chips in a fume cupboard, showing charcoal, tar and flammable gas as products
  • History of chemistry lessons showing how early chemists separated liquids
  • Distilling small volumes where a full condenser set-up is not available

Specifications

Form Bulb with a long neck bent downwards
Stoppered opening Tubulure on top of the bulb for filling or a thermometer
Condensing Air-cooled along the neck; the receiver can be cooled in water
Support Retort stand and clamp, with the bulb on a gauze

Why Choose LabEquip

Schools use retorts to connect modern distillation with its history, and teachers value the stoppered version for easier filling and cleaning. The retort appears among LabEquip’s chemistry lab equipment; send the size wanted through the contact page.

Related Products

Frequently Asked Questions

What does the stopper on a retort flask do?

The stoppered opening, called a tubulure, sits on top of the bulb. It lets reagents be added or a thermometer be inserted without dismantling the set-up, and it makes the retort easier to fill and clean than a plain retort, which can only be charged through its long, bent neck.

How does a retort condense vapour without a water condenser?

Vapour rising from the heated bulb turns into the long neck, which slopes downwards and stays cooler than the bulb. As the vapour travels along it, it loses heat to the glass and the surrounding air and condenses, dripping from the tip into a receiver. Standing the receiver in cold water improves the yield.

Is a retort still used in modern laboratories?

Retorts have largely been replaced by flasks, still heads and water-cooled condensers in research work, but they remain useful for demonstrations and history-of-science lessons. One piece of glass shows boiling, vapour travel and condensation in a form students can follow at a glance.

How should a glass retort be supported over a burner?

Clamp the retort by the neck close to the bulb on a retort stand, rest the bulb on a gauze over a tripod or ring, and support the end of the neck so its weight does not twist the glass. The neck tip should enter the receiver flask without pressing on it, so the apparatus is never sealed.

Can wood or coal be heated in a glass retort?

Destructive distillation of wood splints or coal is a classic retort demonstration, but it produces flammable gases, tar and smoke, so it needs a fume cupboard and strong, steady heat on a clean, dry retort. Heat the solid gradually and remove the receiver tube from any liquid before stopping heating to avoid suck-back.

Why has the stopper of a retort become stuck?

Ground glass stoppers seize when residue dries in the joint or when the neck cools around a warm stopper. Soaking the joint in warm water, tapping gently with a wooden handle and easing the stopper with a twisting motion usually frees it. Store the retort with a strip of paper in the joint between uses.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)