Search

In Stock

Desiccator, Borosilicate Glass

Metrologically Ground Flanges: Precision-engineered ground glass interfaces ensure an airtight seal when lubricated, maintaining a constant internal micro-environment for sensitive reagents during long-term storage or vacuum application.

Heavy-Wall Structural Geometry: Fabricated with reinforced borosilicate glass to withstand significant pressure differentials, preventing implosion and ensuring safety during intensive vacuum cycles in industrial laboratory workflows.

₹885.00

Quick Answer: A borosilicate glass desiccator is a heavy glass vessel with a ground-flanged lid and a perforated plate above a lower chamber that holds a drying agent. It keeps samples in dry air, most often so that heated crucibles and weighing bottles can cool without absorbing moisture before they are weighed.

Cooling to Constant Mass

In gravimetric analysis a crucible or precipitate is heated, cooled and weighed repeatedly until two weighings agree. Cooling in open air would let a hot, dry sample pick up water vapour, so the cooling step takes place in a desiccator. The drying agent in the lower chamber, commonly self-indicating silica gel or anhydrous calcium chloride, keeps the enclosed air dry, and a perforated plate, usually porcelain, supports the crucibles above it.

The lid seals on a ground glass flange that is lightly greased, and it is opened by sliding it sideways rather than lifting it. Borosilicate glass copes better than ordinary soda-lime glass with warm crucibles set on the plate and with changes in room temperature, which is why it is preferred for regular analytical use. It is still not meant for red-hot items: let crucibles cool briefly on a heat-resistant tile before transferring them.

A plain lid is used at atmospheric pressure; a vacuum lid allows faster drying. See the clear glass desiccator for general storage, and the plastic vacuum desiccator when breakage is the bigger concern.

Specifications

Item Desiccator with lid, lower desiccant chamber and plate support
Material Borosilicate glass, per the listing title
Lid seal Ground flange, sealed with a thin film of grease
Plate Perforated support plate, commonly porcelain

Applications

  • Cooling crucibles, weighing bottles and filter crucibles between heating and weighing in gravimetric work
  • Holding oven-dried primary standards, such as anhydrous sodium carbonate, until they are weighed for standard solutions
  • Storing dried soil, cement or plant samples before moisture-content determination
  • Keeping anhydrous salts from absorbing water between practicals

Care & Handling

  • Open by sliding the lid horizontally; lifting a greased lid straight up rarely works and risks dropping it.
  • Regrease the flange sparingly when the lid starts to catch, wiping off old grease first so grit does not scratch the seal.
  • Replace or regenerate the silica gel when its indicator changes colour, and keep desiccant off the plate.
  • Carry a loaded desiccator with both hands and a thumb on the lid, never by the knob alone.

Why Choose LabEquip

Analytical, pharmacy and soil-testing laboratories that weigh to constant mass every day need a desiccator that tolerates warm crucibles. LabEquip lists it among its chemistry lab equipment; give the diameter and lid type you need through the contact page.

Related Products

Frequently Asked Questions

Why is a hot crucible cooled in a desiccator before it is weighed?

A hot, dry crucible and its contents take up water vapour from the air as they cool, which adds mass and spoils a gravimetric result. Cooling in the dry air of a desiccator prevents this, and it also lets the crucible reach room temperature, since a warm object on a balance gives an unsteady, low reading from rising air currents.

Which drying agent should go in a glass desiccator?

Self-indicating silica gel is the most common choice because its colour change shows when it is spent and it can be regenerated in an oven. Anhydrous calcium chloride is cheap and effective for general use. More powerful agents, such as phosphorus pentoxide, are kept for work that needs very dry air and need careful handling.

How do you open a desiccator lid that has stuck?

Slide the lid sideways along the ground flange instead of lifting or levering it. If it will not move, a cooling desiccator may have a partial vacuum inside: wait for it to reach room temperature, or gently warm the lid edge with a cloth soaked in warm water. Never tap the lid with a tool, which can crack the flange.

How hot can a crucible be when it goes into a desiccator?

Let a crucible that has been strongly heated cool in air for a minute or so, until it is no longer glowing, before putting it in. A very hot crucible heats the air inside, which can push the lid up, and as that air cools a partial vacuum can draw the lid down hard; a sudden hot spot on the plate or glass can also crack it.

What does borosilicate glass add to a desiccator?

Borosilicate glass expands much less with temperature than ordinary soda-lime glass, so it copes better with warm crucibles and with the temperature differences that occur during gravimetric work. This borosilicate glass desiccator also resists most laboratory chemicals, which suits the corrosive drying agents and samples it may hold.

How should the ground flange of a glass desiccator be greased?

Spread a thin, even film of desiccator or vacuum grease, or petroleum jelly, on the ground flange of the base, then seat the lid and rotate it slightly until the joint looks clear all the way round. Too much grease squeezes out and collects dust; too little leaves streaky patches where moist air can leak in.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)