Search

In Stock

Streak Plates, Glass

$5.36

Quick Answer: Glass streak plates are small, flat squares of clear glass. The listing photograph shows a set of thin square plates; in earth-science practicals such glass squares serve as the reference surface in mineral hardness tests, and they are also handy clean surfaces for small bench tasks.

Glass and Porcelain in Mineral Testing

Mineral identification uses two simple surfaces, and they do different jobs. The streak test, which shows the colour of a mineral’s powder, is normally done on unglazed porcelain: its slightly rough, hard surface grinds off a thin line of powder. The hardness test asks a different question, whether a mineral is harder than a known material. Glass is the classic reference because it sits in the middle of the scale: minerals such as quartz and feldspar scratch it, while calcite, fluorite and gypsum do not.

Glass streak plates suit that scratch step. Students press a sharp edge of the specimen across the plate, wipe it with a finger, and look for a groove that remains. A mark that wipes away is powder from a softer mineral, not a scratch. Because the plates are small and clear, they fit into bench kits, and a scratch can be checked against the light.

They are not agar streak plates, the Petri dishes of culture medium used in microbiology, and they will not give the coloured powder line that a porcelain tile gives. Plate size, thickness and edge finish are also not stated. For larger sheets, see the laboratory glass plates in the same range.

Specifications

Item Small square plates of clear glass
Form Thin flat squares, several shown in the listing photograph
Main use Glass reference surface in mineral scratch-hardness tests
Not suitable for Colour-of-powder streak tests (use unglazed porcelain) or agar culture

Applications

  • Scratch tests that sort minerals into harder or softer than glass
  • Rock and mineral identification practicals alongside porcelain streak tiles
  • A clean surface for placing a drop of dilute acid on a mineral fragment
  • Holding small specimens flat under a hand lens

Care & Handling

  • Test on a fresh area of the plate each time; old scratches confuse the next student’s result.
  • Wash off rock dust with water and a soft brush, then dry the plates flat.
  • Retire plates that are heavily scratched or chipped, and hold them by the faces until the edge finish is known.

Why Choose LabEquip

Earth-science and general science departments order these plates for rock and mineral practicals. LabEquip lists them in Biology Lab Products next to the Mineral Test Kit, which covers the other identification tests. Ask through the LabEquip contact page if you need matching porcelain tiles or a particular plate size.

Related Products

  • Mineral Test Kit: A mineral test kit with streak tiles, a glass plate, hand lens and steel point for complete identification tests.
  • Streak Collection, Set of 10: A set of ten minerals chosen to show streak colour on an unglazed porcelain plate.
  • Mineral Set, Collection of 50 Minerals: A collection of fifty mineral specimens for practising hardness and other identification tests.
  • Glass Plates: Flat glass plates in more than one size for covers, work surfaces and simple apparatus.

Frequently Asked Questions

Are glass streak plates the same as porcelain streak plates?

No. A porcelain streak plate is unglazed and slightly rough, so rubbing a mineral across it leaves a line of powder whose colour is the mineral’s streak. These plates are clear glass squares, which are used as the reference surface in the hardness test rather than for streak colour.

How is a glass plate used in a mineral hardness test?

Place the glass on a firm, flat surface and press a sharp edge of the mineral firmly across it. If the mineral leaves a real scratch in the glass, it is harder than glass; if it slides or leaves only powder, it is softer. Rub the mark with a finger to tell a scratch from a powder trail.

What is the hardness of glass on the Mohs scale?

Ordinary window or plate glass has a hardness of about 5.5 on the Mohs scale. That places it between apatite at 5 and orthoclase feldspar at 6, which makes glass a convenient dividing line for sorting minerals into softer and harder groups.

Which common minerals scratch glass?

Minerals harder than about 5.5 scratch glass, including orthoclase feldspar, quartz and topaz. Calcite, fluorite, gypsum and talc are softer and will not. A quartz crystal scratching the glass while calcite does not is a quick class demonstration.

Why can a soft mineral seem to scratch glass when it does not?

A soft mineral can leave a line of its own powder on the glass that looks like a scratch. Wipe the plate and look again with a hand lens: a true scratch is a groove that stays and can be felt with a fingernail, while powder rubs away.

Are glass streak plates used in microbiology?

No. In microbiology a streak plate is an agar plate on which bacteria are spread with a loop to give separate colonies. These glass squares are earth-science equipment for mineral testing and general bench work, not culture plates.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)