Search

In Stock

Scalpel Handles, Stainless Steel

AISI 304/420 Martensitic Steel Construction: Forged from medical-grade, corrosion-resistant stainless steel featuring a passivated finish to ensure maximum chemical resistance and longevity during high-pressure steam sterilization protocols.

Calibrated Blade-Fitting Geometry: Engineered with precision-machined grooves and a tapered distal end to provide a secure, zero-tolerance locking mechanism for standard detachable blades, effectively preventing lateral movement during high-tension longitudinal cutting.

$2.54

Quick Answer: Stainless steel scalpel handles are reusable metal holders for detachable scalpel blades. They are used for dissection in biology labs and for incision practice in medical and nursing skills labs, and can be cleaned and sterilised between uses.

No. 3, No. 4 and Longer Handle Patterns

A stainless steel scalpel handle is the permanent half of a two-part scalpel: the blade is replaced when blunt, while the handle is washed and used again. Handles are identified by number. A No. 3 handle takes the small blades, No. 10 to 15, and is the usual choice for dissection. A No. 4 handle has a larger fitting for blades No. 20 to 25 and suits larger specimens. Longer, slimmer versions such as the No. 7 carry small blades deep into a specimen.

Most handles have a flat, textured grip section, and some carry a millimetre scale etched along one side for measuring structures.

Stainless steel is chosen because it tolerates repeated washing, chemical disinfection and steam sterilisation. That makes these handles suitable for microbiology, surgical skills teaching and any work where instruments must be reprocessed.

Specifications

Item Reusable scalpel handle for detachable blades
Material Stainless steel
Common patterns No. 3 (blades 10 to 15), No. 4 (blades 20 to 25), No. 7 (long, blades 10 to 15)
Reprocessing Washing and steam sterilisation, as usual for stainless steel instruments

Applications

  • Dissection of preserved specimens and plant material in school and college biology
  • Incision and suturing practice on skin pads and suture arms in medical and nursing skills labs
  • Cutting tissue samples in histology and pathology teaching
  • Trimming specimen blocks before sectioning

Care & Handling

  • Always remove the blade before washing a stainless steel scalpel handle; wash by hand or in an ultrasonic cleaner and dry fully.
  • Check the blade slot for burrs or bending; a loose fit lets the blade wobble during a cut.
  • Autoclave handles without blades attached and store them in a tray or instrument roll.

Why Choose LabEquip

Colleges, medical and nursing schools buy steel handles once and reorder scalpel blades as needed, which suits departments that run the same practicals every year. For large classes or contaminated work, disposable plastic handles are an alternative. LabEquip lists both in the Biology Lab Products range; send handle numbers and quantities through the contact page.

Related Products

  • Scalpel Blades: Detachable blades numbered for No. 3 and No. 4 handles, the replaceable cutting part of this two-piece scalpel.
  • Scalpel Handles, Plastic Disposable: Single-use plastic handles for classes that prefer to discard handle and blade together after a session.
  • SCALPEL 5.4” KNIFE HANDLE: A 5.4 inch reusable scalpel handle for longer, steady cuts on larger specimens.
  • Scalpels, Fixed: Fixed one-piece scalpels, a no-blade-change option often found in student dissecting sets.
  • Scissors: All-steel dissecting scissors, the other cutting instrument used alongside a scalpel in most dissections.

Frequently Asked Questions

What is the difference between a No. 3 and a No. 4 scalpel handle?

A No. 3 handle takes the smaller blades, No. 10 to 15, and is the usual handle for dissection and fine work. A No. 4 handle is heavier and has a larger fitting for the bigger No. 20 to 25 blades, used for long incisions and large specimens. The two fittings are different sizes, so blades cannot be swapped between them.

What is a No. 7 scalpel handle used for?

A No. 7 is a long, slim handle that takes the same small blades as a No. 3, No. 10 to 15. It is held like a pen and lets the user reach into deep or narrow spaces and make fine, controlled cuts, which is why it is popular for delicate dissection of small specimens.

Can stainless steel scalpel handles be autoclaved?

Yes. Once the blade has been removed and the handle washed, stainless steel handles are steam-sterilised in the same way as other stainless steel instruments. Dry them fully after sterilising and store them dry, so that no water marks or spots form in the blade fitting.

How do I attach a blade to a steel scalpel handle?

Match the angled end of the blade’s slot to the angled shoulder of the handle fitting. Hold the blunt back of the blade in a needle holder, keep the edge pointing away from you and slide the blade down the grooves until it snaps into place. Check it is locked before cutting.

Which scalpel handle should students use for dissection?

A No. 3 handle with No. 10 or No. 11 blades suits most school and college dissections; it is light, fits the hand well and takes the commonly stocked blades. A No. 4 handle is only needed where large specimens call for the bigger blade range.

How should a steel scalpel handle be cleaned after a dissection practical?

First remove the blade into a sharps container. Wash the handle in warm water and detergent, using a small brush to clear tissue from the grooves of the fitting, rinse well and dry completely. Handles used with preserved specimens should be rinsed promptly so fixative does not dry on the metal.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)