Quick Answer: A scintillation vial rack is a bench rack with round holes sized for scintillation vials, holding them upright while samples and scintillation cocktail are added, capped and labelled. It keeps vials in counting order before they are transferred to the counter’s own cassettes.
Preparing Vials for Liquid Scintillation Counting
Liquid scintillation counting measures low-energy beta emitters such as tritium and carbon-14 by mixing the sample with a scintillation cocktail inside a vial. Before counting, each vial is filled, capped, shaken and labelled, often in batches of dozens. A dedicated rack holds the vials steady through these steps, so a tipped vial does not spread radioactive cocktail across the bench.
Vials come mainly as standard vials of about 20 ml and mini vials of around 6 to 7 ml, and a rack is normally made for one of these diameters.
Radioactive work stays inside the area set aside by your radiation safety rules, and the rack becomes part of that area. A tray lined with absorbent paper under the rack catches drips, and the rack should be monitored or wipe-tested after use as your local procedure requires.
Specifications
| Holds | Scintillation vials, upright |
| Use | Filling, capping, labelling and short-term storage of vials |
| Setting | Radioisotope work area, used with a drip tray |
Care & Handling
- Stand the rack in a spill tray lined with absorbent paper.
- Monitor or wipe-test the rack after radioactive work as your radiation safety procedure requires.
- Do not let solvent-based cocktail pool on the rack, since some solvents attack plastics.
- Label the rack for radioactive use so it is never moved to general work.
Applications
- Batch preparation of tritium or carbon-14 samples for counting
- Holding cocktail blanks and standards alongside the samples
- Keeping vials in order for loading into counter cassettes
- Short-term storage of sealed vials awaiting counting or disposal
Why Choose LabEquip
Radiochemistry, biochemistry and pharmacology labs that run liquid scintillation counting need racks that keep vials in order during preparation. LabEquip offers this rack in the Biology Lab Products range alongside scintillation vials; give the vial size on the contact page.
Related Products
- Scintillation Vial: Screw-capped scintillation vials, the containers the rack is made to hold.
- Vial Block: A metal block with wells for heating or cooling vials evenly in a dry bath.
- Storage Vial: Plastic storage vials for small samples, held in racks of a matching size.
- Ria Vial: Small round-bottom RIA tubes used in radioimmunoassay alongside scintillation work.
Frequently Asked Questions
What is a scintillation vial rack used for?
It is a bench rack with round holes sized for scintillation vials, holding them upright while samples and scintillation cocktail are added, capped, shaken and labelled. It also keeps the vials in counting order before they go into the counter’s own cassettes or trays.
Can the rack be placed directly into a scintillation counter?
Usually not. Liquid scintillation counters load vials from their own cassettes, trays or belts, so a bench rack is used for preparation and short-term holding. Vials are moved from the rack into the counter’s carrier in the recorded order.
Why should vials be kept in a fixed order in the rack?
Scintillation vials often look identical, and results are matched to samples by their position in the counting sequence. Keeping the same order in the rack, the notebook and the counter cassette prevents mix-ups, especially with blanks and standards placed at the start of a run.
Do standard and mini scintillation vials fit the same rack?
Not usually. Standard vials and mini vials differ in diameter, so a rack is sized for one or the other; mini vials sit loosely and tilt in holes made for standard vials. Choose a rack that matches the vials in use, or use an adaptor insert where the counter accepts both.
How should the rack be cleaned after work with radioactive samples?
Follow the lab’s radiation safety rules: check the rack with a contamination monitor or a wipe test, clean any contamination with a suitable decontaminating solution and recheck. Racks used for radioactive work should stay in the designated area and be stored on a drip tray.
Can scintillation vial racks hold other vials and small tubes?
Yes, if the hole diameter matches. Scintillation-sized vials are also used for storing small samples outside radiochemistry, and the same rack can hold them upright on the bench. Vials of a much smaller diameter will lean, so match the rack to the vial size.
Last Updated: November 2026










Reviews
There are no reviews yet.