Search

In Stock

PCR Tubes

Advanced Thin-Wall Geometry: Precision-molded to achieve uniform wall thickness, facilitating near-instantaneous thermal equilibrium and maximum enzymatic reaction efficiency across all thermal cycling stages.

Vapor-Tight Hermetic Closure: Engineered with high-integrity snap-caps that prevent evaporative loss and sample aerosolization, ensuring stable internal pressure even during high-temperature denaturation phases.

$2.71

Quick Answer: PCR tubes are small, thin-walled plastic tubes, usually polypropylene, that each hold one polymerase chain reaction in the heated block of a thermal cycler. The common format is a 0.2 ml tube with a hinged cap; the size of this listing should be matched to your cycler.

Why the Walls Are Thin

A PCR cycle swings the reaction between about 95 °C for denaturation, a lower annealing temperature and about 72 °C for extension, often thirty or more times. Thin, uniform walls let the mix follow each temperature change quickly, which is why ordinary microcentrifuge tubes, with thicker walls and a different shape, are not used in a cycler block.

The 0.2 ml size is standard for modern cyclers, while some older instruments were built for 0.5 ml tubes, and the two cannot be swapped in the same block. Single tubes are the most flexible choice for small runs, such as a classroom demonstration with a handful of samples, a pair of positive and negative controls or a quick colony check.

Polypropylene is used because it tolerates repeated heating close to boiling and binds little DNA. For sensitive work, ask whether the tubes carry a nuclease-free statement, and keep the bag closed between uses.

Specifications

Type Single PCR tube with cap
Wall Thin wall for fast heat transfer
Material Polypropylene is the usual material
Cap Hinged cap, flat or domed by version

Applications

  • Student practicals that amplify a gene from their own cheek-cell DNA
  • Colony PCR to check a single bacterial clone
  • Running controls alongside a strip or plate
  • Short incubations such as enzyme digests in a thermal cycler

Care & Handling

  • Open and close caps with a clean gloved hand and never touch the inside of the cap.
  • Mark the tube side with a fine marker before adding liquids.
  • Flick or briefly spin tubes after loading so no droplet clings to the wall.
  • Seal used tubes holding amplified DNA in a bag before discarding, to limit amplicon spread.

Why Choose LabEquip

Schools introducing biotechnology practicals and research labs running small checks both rely on single PCR tubes. LabEquip supplies them in its Biology Lab Products range, with a PCR tube rack to hold them during set-up; volume and cap style can be discussed on the contact page.

Related Products

  • PCR Tube Strip: PCR tube strips of joined tubes for runs of eight or more samples loaded with a multichannel pipette.
  • PCR Plate: A 96-well PCR plate for larger numbers of reactions in one run.
  • PCR Tube Rack: An open PCR rack that holds single tubes upright during reaction set-up.
  • Molecular Model of DNA PCR Principle: A DNA model of the PCR principle for explaining what happens inside the tube during each cycle.

Frequently Asked Questions

Why are PCR tubes thin-walled?

A PCR cycle swings the reaction between about 95 C for denaturation, a lower annealing temperature and about 72 C for extension, many times over. Thin, uniform walls let the mix follow each temperature change quickly and evenly, which keeps cycling times short and results consistent.

Can a 1.5 ml microcentrifuge tube be used in a thermal cycler?

No. Microcentrifuge tubes have thicker walls and a different shape, so they do not fit the cycler block wells closely and heat passes into them too slowly for accurate cycling. Use thin-walled PCR tubes, strips or plates made for the block.

What is the difference between 0.2 ml and 0.5 ml PCR tubes?

The 0.2 ml tube is the standard for modern thermal cyclers, while some older instruments were built for 0.5 ml tubes. The two sizes need different block wells and cannot be swapped in the same block, so the tube size is matched to the cycler in use.

Should I choose flat or domed caps on single PCR tubes?

Single PCR tubes have a hinged cap that comes flat or domed by version. Domed caps seal tightly and suit end-point PCR; flat caps give an even surface for writing on and for instruments that read fluorescence through the cap in qPCR.

Why did my PCR tube lose volume during cycling?

Volume is lost when the cap is not fully closed, when the heated lid is off or not pressing evenly, or when the tube does not sit snugly in the block. Press caps down firmly, use the heated lid, and spin tubes briefly before the run to collect droplets at the bottom.

When are single PCR tubes the right choice?

Single tubes are the most flexible format for small runs: a classroom demonstration with a few samples, positive and negative controls run beside a strip, a quick colony check or a short incubation in the cycler. Polypropylene tolerates repeated heating close to boiling and binds little DNA.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)