Search

In Stock

PCR Plate

Ultra-Thin Wall Geometry: Precision-molded wall thickness minimizes thermal resistance, ensuring rapid heat transfer and temperature equilibrium across all wells to reduce overall cycle times and improve reaction specificity.

Raised Well Rim Architecture: Engineered with elevated rims to optimize hermetic sealing with films, foils, or strip caps, significantly reducing evaporative loss and preventing cross-contamination during high-temperature denaturation phases.

$6.09

Quick Answer: A PCR plate is a one-piece moulded plate of thin-walled wells, usually polypropylene, that holds many polymerase chain reactions side by side in a thermal cycler block. It is chosen when a run has more samples than single tubes or strips can conveniently handle, and for real-time qPCR.

Skirts, Wells and Seals

Most plates of this kind follow the 96-well layout with rows A to H and columns 1 to 12, and 384-well versions exist for automated work. The wells have thin walls so heat passes quickly from the metal block into the reaction mix, keeping cycling times short and temperatures uniform. The well count and profile of this listing should be matched to your cycler block.

The skirt is the frame around the wells. A non-skirted plate has none and can be cut into sections for small runs; a semi-skirted plate has a short rim that stiffens it for pipetting; a fully skirted plate has a full-height rim that makes it rigid enough for robotic handlers and plate readers. Some cyclers accept only one of these styles.

Sealing matters as much as the plastic. Adhesive optical films are used for qPCR because fluorescence is read through them, while cap strips or heat-sealed foils suit end-point PCR and storage. Whichever seal is chosen, press it firmly around every well rim so no reaction evaporates during the high-temperature steps.

Specifications

Format Multi-well plate, most often 96 wells
Material Moulded plastic, typically polypropylene for PCR plates
Wells Thin-walled for rapid heat transfer
Sealing Adhesive film, cap strips or heat seal, used with the plate
Uses End-point PCR, qPCR and short-term frozen storage

Handling Tips

  • Keep plates in their packaging until needed to avoid dust and nuclease contamination.
  • Spin a sealed plate briefly in a plate centrifuge to bring droplets down and clear bubbles before cycling.
  • Write on the skirt or plate side, not across the wells, since marks on the seal can interfere with fluorescence reading.
  • Discard after one run; thin PCR wells are not meant for washing and reuse.

Applications

  • Genotyping panels where dozens of samples are amplified with one primer pair
  • Real-time qPCR for gene expression or pathogen detection, under an optical seal
  • Colony PCR to screen many bacterial transformants in one run
  • Setting up sequencing reactions before clean-up

Why Choose LabEquip

Research groups, diagnostic training labs and university molecular biology courses move to plates once their runs outgrow single tubes. LabEquip lists this plate in its Biology Lab Products range alongside PCR tube strips for smaller runs; share your cycler model on the contact page to match the plate format.

Related Products

  • PCR Tube Strip: A PCR tube strip, the smaller format for runs too big for single tubes but too small for a full plate.
  • PCR Tubes: Single PCR tubes for a handful of reactions or controls run alongside a plate.
  • PCR Rack with Cover: A covered PCR rack for holding and protecting tubes and strips before they go to the cycler.
  • Molecular Model of DNA PCR Principle: A DNA model of the PCR principle for teaching denaturation, annealing and extension.

Frequently Asked Questions

What is a PCR plate used for?

A PCR plate is a one-piece moulded plate of thin-walled wells, most often 96, that holds many polymerase chain reactions side by side in a thermal cycler. It is used for end-point PCR, qPCR and short-term frozen storage when a run has more samples than single tubes or strips can handle.

What do skirted, semi-skirted and non-skirted mean on a PCR plate?

The skirt is the frame around the wells. A non-skirted plate has none and can be cut into sections; a semi-skirted plate has a short rim that stiffens it for pipetting; a fully skirted plate has a full-height rim that makes it rigid enough for robotic handlers and plate readers.

Which skirt style will fit my thermal cycler?

The block design decides it: some cyclers accept only one skirt style, and real-time instruments often specify a particular plate profile. Check the cycler’s documentation for the well count and profile it takes, then choose a plate of matching layout and skirt.

How do I stop reactions evaporating from a PCR plate?

Seal the plate with an adhesive film, cap strips or heat seal, and press the seal firmly around every well rim, especially at the corners and edges. Use the cycler’s heated lid, and spin the sealed plate briefly to bring droplets down before the run starts.

Which seal should be used for qPCR on a PCR plate?

For qPCR use an optical adhesive film, because fluorescence is read through the seal and the film gives an even, clear surface. Cap strips or heat-sealed foils suit end-point PCR and storage. White or frosted wells are often chosen for qPCR to reflect more signal.

Is a PCR plate reusable?

PCR plates are single-use. The thin walls deform after cycling, seals leave adhesive behind and any amplified product left in a well would contaminate the next reaction. Plates are kept sealed in their packaging until needed and discarded after the run or after storage.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)