Search

In Stock

OAK Ridge Centrifuge Tubes, Plastic

High-RCF Structural Integrity: Engineered with reinforced wall thickness to withstand relative centrifugal forces (RCF) up to 50,000 x g in fixed-angle rotors, preventing vessel deformation during extreme sedimentation protocols.

Hermetic Seal Technology: Features a precision-threaded screw cap with an integrated liner-less seal, providing a vacuum-compatible, leak-proof barrier that prevents aerosolization and liquid bypass during high-velocity rotation.

$4.34

Quick Answer: Oak Ridge centrifuge tubes are thick-walled plastic tubes, usually round-bottomed, with a threaded neck and screw closure, made in the Oak Ridge style for high-speed centrifuge rotors. Laboratories use them to pellet bacteria, yeast and precipitated nucleic acids and to clear debris from lysates.

What Sets the Oak Ridge Style Apart

The Oak Ridge design takes its name from Oak Ridge National Laboratory in the United States, where this tube style originated for high-speed work. Compared with the conical 15 ml and 50 ml tubes used in benchtop centrifuges, an Oak Ridge tube has a heavier wall, a rounded base and a threaded mouth that takes a sealing cap, a shape that suits the cavities of fixed-angle rotors in high-speed and superspeed machines.

Because the tube is held at an angle during the run, the pellet collects along the outer wall near the base rather than in a pointed tip. Many users draw a small mark on the outer side of each tube before loading so they know where to look for a faint or glassy pellet, such as ethanol-precipitated DNA, and they pour the supernatant off from the opposite side.

The title says only plastic, and the resin matters. Polycarbonate tubes are clear, so the pellet is easy to see, but they are weakened by alkaline solutions and many organic solvents and lose strength with repeated autoclaving. Polypropylene tubes are translucent rather than clear but resist a wider range of chemicals. Match the resin and the rated maximum g-force to your rotor before ordering.

Specifications

Tube style Oak Ridge type, usually round bottom with threaded neck
Closure Screw cap, as is usual for the style
Material Plastic (as titled)
Typical rotors Fixed-angle rotors of high-speed centrifuges

Applications

  • Harvesting bacterial or yeast cells from broth cultures before plasmid or protein extraction
  • Recovering DNA or RNA after ethanol or isopropanol precipitation
  • Clarifying cell lysates by spinning down insoluble debris
  • Collecting precipitates during ammonium sulfate fractionation of proteins

Using the Tubes Safely in a Rotor

  • Balance opposite tubes on a scale rather than by eye, because small mass differences matter at high speed.
  • Follow the rotor and tube guidance on minimum fill; partly filled plastic tubes can distort under high g-force.
  • Never exceed the tube’s rated g-force, and retire any tube showing crazing, cracks or cloudiness.
  • Clean with a neutral detergent; strong alkaline cleaners cause stress cracking in polycarbonate.

Why Choose LabEquip

Molecular biology, microbiology and biochemistry labs order these tubes when a benchtop centrifuge is not enough and a high-speed rotor is in use. LabEquip supplies them within its Biology Lab Products range; for low-speed spins where volume must be read, a graduated glass centrifuge tube is the alternative. Send your rotor model through the contact page so the tube can be matched to it.

Related Products

Frequently Asked Questions

What is an Oak Ridge centrifuge tube?

An Oak Ridge tube is a thick-walled tube, usually round-bottomed, with a threaded neck and screw closure, made for the fixed-angle rotors of high-speed centrifuges. This listing is the plastic version, used to pellet bacteria, yeast and precipitated nucleic acids and to clear debris from lysates.

How is an Oak Ridge tube different from a conical centrifuge tube?

Conical 15 ml and 50 ml tubes have pointed bottoms and are used in benchtop centrifuges. An Oak Ridge tube has a heavier wall, a rounded base and a threaded mouth that takes a sealing cap, a shape suited to the cavities of fixed-angle rotors in high-speed machines.

Why does the pellet form on the side of an Oak Ridge tube?

In a fixed-angle rotor the tube is held at an angle, so material is driven against the outer wall and slides down it, collecting along that wall near the base. Marking the outer side of each tube before loading shows where to look for a faint pellet and which side to pour from.

Should I choose polycarbonate or polypropylene Oak Ridge tubes?

Polycarbonate tubes are clear, so pellets are easy to see, but alkaline solutions and many organic solvents weaken them and repeated autoclaving shortens their life. Polypropylene is translucent rather than clear but resists a wider range of chemicals. The title says plastic, so the resin is matched to the samples.

Can plastic Oak Ridge tubes be autoclaved?

Polypropylene tubes generally tolerate autoclaving, while polycarbonate tubes lose strength with each cycle and should be autoclaved sparingly. Loosen or remove caps during autoclaving so pressure can equalise, and inspect tubes for cracks or crazing before using them again at high speed.

How do you balance and fill Oak Ridge tubes for a high-speed run?

Fill tubes to the level the rotor manufacturer recommends, cap them tightly and balance opposite tubes by weight, not by eye. Never exceed the rated speed of the tube or rotor, and check each tube for cracks first. For hazardous samples, open the rotor only inside a biosafety cabinet.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)