Search

In Stock

MCT Box

Alphanumeric Coordinate Mapping: Features an indelible, high-contrast grid system molded into the base and lid to ensure precise sample traceability and eliminate retrieval errors during high-throughput workflows.

Advanced Polymer Thermal Range: Manufactured from medical-grade, reinforced polypropylene capable of maintaining structural integrity from -90°C to +121°C, providing full compatibility with both ultra-low temperature storage and steam sterilization.

₹520.00

Quick Answer: The MCT Box is a storage box for microcentrifuge tubes (MCTs), holding them in a grid of positions under a lid so that samples can be kept in refrigerators and freezers and located by position. An MCT box usually takes the standard 1.5 ml and 2.0 ml tubes.

What an MCT Box Is For

MCT is shorthand for microcentrifuge tube, the 1.5 ml or 2.0 ml snap-cap tube used across molecular biology and biochemistry. Where an MCT Rack holds tubes open and within reach during the working day, an MCT box is for what comes afterwards: tubes are closed, placed in numbered positions and moved into cold storage, where the lid protects the caps and keeps frost off the tops.

Microtube freezer boxes are commonly polypropylene, with a lid that is either hinged or separate and positions marked by letters along one side and numbers along the other. Some lids carry a matching grid printed on top, so the map can be read before opening. The grid size, lid design and material of this box are not stated in its title. The range also lists a Box for Micro Centrifuge Tubes; the two names describe the same kind of item, so compare grid, lid and material when choosing between them.

Good freezer practice starts with the box. Give every box a unique number, write owner and date on the lid and front, and keep a map of each position so that a single aliquot can be taken out and the box returned before the other samples warm. Keeping one sample type or project per box also makes it simple to discard a finished project in one step.

Applications

  • Freezer storage of DNA, RNA and protein aliquots
  • Keeping restriction enzymes, primers and PCR reagents in labelled positions
  • Archiving the samples from a completed practical or project together
  • Moving closed tubes between labs or buildings without them tipping over

Care & Handling

  • Close each tube cap fully before placing it in the box
  • Keep a written grid map for every box and update it whenever tubes are removed
  • Clean spills promptly with detergent, decontaminating first if biological material leaked
  • Handle frozen plastic boxes carefully, as they are more brittle when cold

Specifications

Type Storage box for microcentrifuge tubes (MCTs)
Common tube sizes 1.5 ml and 2.0 ml
Positions Grid marked with letters and numbers in most designs
Storage Refrigerator, −20 °C and −80 °C freezers

Why Choose LabEquip

Microtube storage boxes are bought by molecular biology, genetics and biotechnology labs, and by colleges where each student’s samples must stay separate and traceable. LabEquip supplies them with racks and tubes in Biology Lab Products; ask about grid size and lid type through our contact page.

Related Products

  • MCT Rack: An open MCT rack for holding the same tubes upright on the bench while samples are prepared.
  • MCT Twin Rack: A twin rack with one face for 1.5 and 2.0 ml tubes and one for 0.5 ml tubes.
  • Box for Micro Centrifuge Tubes: Another storage box for 1.5 and 2.0 ml microcentrifuge tubes in refrigerator and freezer storage.
  • Centrifuge Tube, Micro, Plastic: Microcentrifuge tubes with attached caps in the 1.5 and 2.0 ml sizes this box holds.
  • Cryo Box: A cryo box with a grid for cryovials, for samples that go into liquid nitrogen storage.

Frequently Asked Questions

What is an MCT box used for?

An MCT box stores microcentrifuge tubes upright in a grid of positions under a lid, so samples can be kept in a refrigerator or freezer and found again by position. It usually takes the standard 1.5 ml and 2.0 ml tubes, and in most designs the grid is marked with letters and numbers.

What is the difference between an MCT box and an MCT rack?

A rack is an open bench holder used while working, with tubes opened, filled and closed in it. A box has a lid and is built for storage: tubes are closed, placed in numbered positions and moved into the cold, where the lid protects the caps and the boxes can be stacked.

Can an MCT box be stored at -80 °C?

MCT boxes of this type are used in refrigerators and in -20 °C and -80 °C freezers. Plastics become stiffer and more brittle when very cold, so handle frozen boxes with care, avoid dropping them and wear insulated gloves when taking them out of an ultra-low freezer.

How should samples in an MCT box be labelled and recorded?

Label each tube with a freezer-proof marker or cryo label, label the box lid and side with a box name, and record every tube’s position, such as A1 or B4, in a log or spreadsheet. Then a sample can be found without searching through a freezer and letting it warm.

Do 0.5 ml microtubes fit a box made for 1.5 and 2.0 ml tubes?

Smaller 0.5 ml tubes are narrower and sit loosely in positions sized for 1.5 and 2.0 ml tubes, so they can tip over or get lost. They are better kept in a box or rack made for that size, such as the 0.5 ml face of a twin rack.

How can frost and condensation be kept from spoiling labels in an MCT box?

Keep the lid closed when taking a box out of the freezer and return it quickly, because moist room air condenses and freezes on cold tubes. Use labels or markers rated for freezer use and alcohol, and wipe frost off the lid before reading the box name.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)