Search

In Stock

Cryo Box (PC)

Thermal Shock Resistance: Engineered from premium-grade polycarbonate, these units maintain mechanical stability across a temperature gradient of -196°C to +121°C, preventing stress fractures during rapid immersion or thawing.

Permanent Alphanumeric Indexing: Features high-contrast, indelible grid markings integrated into the lid and base to ensure precise sample mapping and eliminate identification errors in high-density freezer environments.

$4.00

Quick Answer: The Cryo Box (PC) is a cryovial storage box moulded from polycarbonate, a clear, tough plastic that keeps its impact strength at very low temperatures. A polycarbonate cryo box is used for storing vials in ultra-low freezers and in liquid nitrogen vapour phase, where some plastics turn brittle.

Why Polycarbonate for Cryogenic Boxes

Polycarbonate is valued in cryogenic storage for its mix of glass-like clarity and toughness. Many plastics become brittle as they cool towards liquid nitrogen temperatures, but polycarbonate is known for keeping its impact resistance well in the cold, so a box knocked against a tank rack is less likely to crack. Because the plastic is transparent, labels and vial caps can be read through the lid without opening it and letting warm air in.

That clarity also helps with inventory. With a clear lid, a missing or misplaced vial shows at a glance, and colour-coded caps or Cryo Coders are visible from above. Boxes of this material commonly have drainage holes so liquid nitrogen runs out when the box is lifted from a tank.

Polycarbonate has cleaning limits that polypropylene does not. It is attacked by alkaline detergents and many solvents, and repeated autoclaving weakens it over time, so washing with a neutral detergent and disinfecting with a compatible agent is the usual routine. Where frequent autoclaving is needed, the Cryo Box (PP) is the better match.

Cleaning and Handling Polycarbonate

  • Wash with a neutral, non-alkaline detergent and rinse well
  • Keep acetone and chlorinated cleaners away, as they craze polycarbonate
  • Limit autoclaving; repeated cycles leave polycarbonate cloudy and weaker
  • Lift boxes from liquid nitrogen with cryogenic gloves and a face shield, and let liquid drain before carrying

Applications

  • Long-term storage of cell lines and tissue in liquid nitrogen vapour-phase tanks
  • Biobank storage where vials must be identified through the lid
  • Holding reference strains and master cell banks that are inventoried often
  • Moving frozen vial sets on dry ice inside an insulated container

Specifications

Type Cryovial storage box with grid
Material Polycarbonate (PC)
Material strengths Clarity; toughness at very low temperatures
Typical use −80 °C freezers and liquid nitrogen vapour phase

Why Choose LabEquip

Biobanks, stem cell and cell culture labs, and hospital research units that store valuable samples in liquid nitrogen for the long term tend to choose polycarbonate. LabEquip supplies the PC box with vials and coders in Biology Lab Products; send your vial size and storage method through our contact page.

Related Products

  • Cryo Box (PP): The polypropylene cryo box, chosen over polycarbonate where frequent autoclaving and broad chemical resistance matter.
  • Cryo Box (Cardboard): A disposable coated-cardboard cryo box for mechanical freezers when reuse is not needed.
  • Cryo Coders: Coloured cap inserts that show clearly through a transparent lid for sorting vials by project or owner.
  • Cryo Vial-Internal Thread: Internal thread cryovials, which pack closely in a box grid because the cap does not widen the vial.

Frequently Asked Questions

Why is polycarbonate used for cryogenic storage boxes?

Polycarbonate combines glass-like clarity with toughness that it keeps at very low temperatures, where many plastics turn brittle. A polycarbonate cryo box knocked against a freezer rack is less likely to crack, and its clear lid shows the vial caps without opening the box.

Can a polycarbonate cryo box be autoclaved repeatedly?

Polycarbonate tolerates steam sterilisation poorly over time: repeated autoclave cycles weaken and can craze it. Clean a PC box by washing with a neutral detergent and wiping with a disinfectant compatible with polycarbonate. Where boxes need frequent autoclaving, polypropylene is the better material.

Which detergents and disinfectants are safe on a polycarbonate cryo box?

Use a neutral detergent and a disinfectant whose label lists polycarbonate as compatible. Polycarbonate is attacked by alkaline cleaners and by many organic solvents, which can cloud or crack it. Rinse well and let the box dry fully before it goes back into the freezer.

Is a polycarbonate cryo box suited to liquid nitrogen vapour storage?

Yes. The Cryo Box (PC) is meant for -80 °C freezers and for the vapour phase above liquid nitrogen, where its low-temperature toughness counts. Boxes of this kind commonly have drainage holes so any liquid nitrogen runs out when the box is lifted.

Why does a clear lid help when storing frozen samples?

A clear lid lets you read the box layout, see coloured cap inserts and spot an empty position without lifting the lid. Each opening lets warm, moist air in, so finding a vial at a glance shortens the time the whole box spends out of the cold.

Why does a cryo box frost over when it comes out of the freezer?

Moisture in room air freezes onto the cold surfaces as soon as the box is lifted out, forming frost on the lid and vials. It does no harm to the box, but it hides labels and adds water each time. Work quickly, return the box promptly and keep a printed map so the lid stays closed.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)