Search

In Stock

Bat Houses

Gîtes à chauves-souris Features a textured interior surface and landing pad with 1.5 mm horizontal grooves, providing essential grip for roosting bats while facilitating secure vertical movement within the chamber.

Calibrated Thermal Architecture utilizes multi-chambered internal spacing and heat-absorbent exterior finishes to maintain a stable microclimate of 27 °C to 38 °C, essential for the development of neonatal pups in professional nursery colonies.

$12.24

Quick Answer: Bat Houses, also called bat boxes, are small shelters fixed to a wall, tree or post that give bats a safe place to roost. Schools and ecology groups put up a bat box to support local bats and to study them without disturbing them.

How a Bat House Works

Bats roost by day in narrow, sheltered crevices: under loose bark, in cracks in trees and in gaps in buildings. Many of these natural roosts have been lost, and a box replaces some of them. The version in the product photo is a tall wooden box with a sloping roof, an entrance slot underneath and a grooved landing area below it, the usual design for crevice-roosting bats. Bats land on the rough surface, crawl up through the slot and cling to the walls inside.

Siting matters more than design. Bat conservation groups commonly advise fixing boxes at least 3 to 5 metres above the ground, sheltered from strong wind, with a clear flight path to the entrance and no bright lights shining on it. Boxes that catch the sun for part of the day warm up, which suits breeding females in cooler climates, and putting up two or three facing different directions lets bats choose a temperature. Occupation can take a year or more, so patience is part of the lesson.

In many countries bats and their roosts are legally protected, so once a box is in use it should not be opened or disturbed. Instead, look for droppings beneath it, which are dry and crumble into fragments of insect remains, and watch the entrance at dusk as the bats emerge.

Projects with a Bat House

  • School-grounds biodiversity projects that add roosting habitat
  • Dusk emergence counts as a long-term monitoring activity for eco-clubs
  • Lessons on nocturnal animals, echolocation and insect-eating mammals
  • Surveys of bat activity with a bat detector, where one is available

Siting and Upkeep

  • Do not paint or treat the inside of the box; bats need a rough surface to grip and can be harmed by chemical wood treatments.
  • Fix it firmly so it does not swing, and check the fixings once a year outside the breeding season.
  • Never open or disturb an occupied box; where bats are legally protected, inspections need a licence.
  • Wear gloves if collecting droppings from below the box, and wash hands afterwards.

Specifications

Type Roosting box for bats
Design shown in the product photo Wooden box with sloping roof, entrance slot underneath and grooved landing area
Mounting Wall, tree or post, well above ground
Uses Habitat provision and non-invasive bat monitoring

Why Choose LabEquip

Schools, nature reserves and eco-clubs put up bat boxes as a long-term habitat project that pupils can monitor year after year. They are part of LabEquip’s biology lab products; for quantities and fixing details, use the contact page.

Related Products

Frequently Asked Questions

Where should a bat house be put up?

Fix it high on a wall, tree or post; bat conservation groups commonly advise at least 3 to 5 metres above the ground. Choose a spot sheltered from strong wind, with a clear flight path to the entrance and no bright lights shining on it. On a tree, clear away branches that block the approach.

Which direction should a bat box face?

A box that receives sun for part of the day stays warm, which suits breeding females in cooler climates, while one in full sun all day may overheat in hot weather. Putting up two or three boxes facing different directions lets the bats move between them to find the temperature they need.

How long does it take for bats to start using a bat house?

It can take a year or more, and some boxes are never used, so patience is part of the project. Bats are more likely to find a box placed near hedges, tree lines or water, which they follow when feeding. Leave the box in place rather than moving it if it stays empty for the first season.

How can you tell if bats are using a bat box without opening it?

Look for droppings on the ground or wall below the box. Bat droppings are dry and crumble into tiny shiny fragments of insect remains, unlike mouse droppings, which are hard. You can also watch the entrance at dusk and count the bats as they emerge, or listen with a bat detector.

Why does a bat box have a grooved landing area and an entrance underneath?

Bats land on the rough or grooved surface below the box, grip it with their feet and crawl up into the roost through the slot. An entrance underneath keeps rain out and makes the box less attractive to birds. Inside, crevice-roosting bats cling to the walls as they would in a crack in a tree.

Should the wood of a bat box be painted or treated?

The inside should be left as bare, untreated wood, because bats are sensitive to chemical wood preservatives and need a rough surface to cling to. If the outside needs protection, a water-based, non-toxic finish is used and allowed to dry fully before the box goes up. Many boxes are simply left to weather.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)