Spot Check Pulse Oximeter With Accessories Equipment Manufacturer,Supplier and Exporter in India

Spot Check Pulse Oximeter With Accessories

Product Code : EL-MDE-11062
The Lab Equipment is a leading Spot Check Pulse Oximeter With Accessories Manufacturer,and suppliers in India, Spot Check Pulse Oximeter With Accessories Manufacturer,and suppliers in South Africa.Spot Check Pulse Oximeter With Accessories Suppliers in Mozambique,Spot Check Pulse Oximeter With Accessories in Supplier Kenya, Argentina (Buenos Aires), Australia (Canberra), Austria (Vienna), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb) nda, Seychelles, Tanzania and Uganda.

Robust shock resistant design allow use in demanding environments.
Suitable for professional clinical use, all patient categories neonate, infant, adult.
Ultra-compact pulse oximeter integrated into finger/toe clip.
Accommodates finger/toe thicknesses 8 to 25mm directly or through the use of a separate sensor which can be connected to the device.
Measuring ranges:
SpO2 accuracy within: +/-3%
Pulse rate resolution: 1 bpm
Pulse rate accuracy: within: +/-3%
Pulse rate detection: 30 to 240 bpm
SpO2 resolution: 1% or less
Enclosure protection or better
SpO2 detection within the range of: 70 to 99%
The unit is equipped with an automatic power off feature.
Power requirements two 1.5V AAA batteries.
Display shows SpO2, pulse rate, signal strength, sensor error or disconnect and low battery.
For cleaning and disinfection with hospital-grade cleaning products.
Batteries must allow at least 2500 spot-checks, calculated at 30 seconds per spot-check, or at least 21 hours of operation.

Instructions for use:
Pulse oximeter must be used and maintained properly according manufacturer's instructions.
For spot-check of percentage arterial oxygen saturation (SpO2, %) and pulse rate (HR, bpm) of all patient categories. Non-invasive monitor using a clip-on sensor placed on a finger or toe. The spot-check pulse oximeter is ultra-compact and fits easily pocket or carry-on bag.

Environmental Conditions:
Storage conditions temperature: -20 °C to 60°C / RH: 10% - 95%
Operating conditions temperature: 5 to 40°C / RH: 30 to 80%


Office Address

Works: C-956, Lane 2, Ashok Vihar, Phase-II,
Gurugram, Haryana 122001

[email protected]


Follow Us