Laboratory Burette Stand

The Laboratory Burette Stand is a laboratory support apparatus used for holding compatible burettes in a stable vertical position during titration and related analytical procedures. It is intended for chemistry, educational, research and analytical laboratories where controlled burette positioning is required for accurate liquid dispensing and convenient observation.

Product Description

The STEMAids Laboratory Burette Stand provides a supporting structure for burettes and compatible laboratory clamps during volumetric analysis. A properly assembled stand helps maintain the burette in an upright position while leaving sufficient working space below the outlet for a receiving flask or other suitable vessel.

The exact base material, support-rod material, rod height, rod diameter, base dimensions, clamp configuration and maximum supported load are . These specifications should be verified before describing the stand as cast iron, steel, powder-coated, corrosion-resistant or heavy-duty. Browse related STEMAids laboratory support and physics equipment.

Key Features

• Burette support: Provides a vertical mounting structure for compatible burettes during titration procedures.
• Stable laboratory setup: The base-and-rod format supports organized analytical work on a laboratory bench.
• Adjustable positioning: Compatible clamps can be positioned along the support rod according to the experimental setup.
• Titration workflow support: Keeps the burette positioned above a receiving vessel for controlled reagent delivery.
• Reusable laboratory equipment: Intended for repeated practical and analytical setups when correctly maintained.
• Educational utility: Suitable for teaching titration, volumetric analysis and laboratory apparatus assembly.
• Verified load required: Maximum load, rod dimensions and clamp compatibility are .

Technical Specifications

What’s Included in the Kit

• Laboratory stand bas
• Vertical support rod 
• Burette clamp 
• Boss head / clamp connector
• Protective packaging

Applications / Uses

• Supporting burettes during acid-base titrations.
• Holding volumetric dispensing equipment in analytical chemistry setups.
• Positioning compatible clamps and laboratory accessories.
• Teaching titration and quantitative analysis in school and college laboratories.
• Supporting routine solution-standardization procedures.
• Building compatible laboratory support assemblies for demonstrations and experiments.

For associated support components, explore STEMAids general laboratory items. For a compatible titration instrument, see the STEMAids Burette with PTFE Key.

How to Use the Laboratory Burette Stand

1. Place the stand base on a stable, level laboratory bench.
2. Fit and secure the vertical support rod according to the stand design.
3. Attach a compatible boss head and burette clamp if these components are required.
4. Position the burette vertically and tighten the clamp gently without placing excessive pressure on the glass.
5. Adjust the burette height so the receiving vessel can be positioned safely below the outlet.
6. Check that the stand, clamp and burette are stable before filling the burette.
7. After the procedure, empty the burette safely before removing it from the stand.

Safety note: Do not overtighten a clamp around glass burettes. Keep the stand base fully supported on the bench and avoid top-heavy or off-centre loading that could cause the apparatus to tip.

Care & Maintenance

• Keep the base, rod and threaded connections clean and free from chemical residues.
• Inspect the support rod, base connection and clamp fittings regularly for looseness, corrosion or deformation.
• Dry the stand after exposure to liquids to reduce corrosion where applicable.
• Store the stand assembled safely or disassembled according to available laboratory storage space.

Why Choose STEMAids

STEMAids is the STEM education brand of Eduscope Smart Learning Solutions Private Limited, a New Delhi-based manufacturer of scientific and educational laboratory products. Its catalogue covers laboratory glassware, physics apparatus and supporting components for complete laboratory setups. STEMAids publishes ISO 9001:2015 company-level quality-management credentials and maintains an active Importer-Exporter Code for institutional and export orders. These corporate credentials do not constitute a product-specific load or safety certification for this burette stand.

Frequently Asked Questions

What is a Laboratory Burette Stand used for?

A Laboratory Burette Stand is used to hold a compatible burette vertically during titration and other volumetric laboratory procedures.

Does a burette stand include a clamp?

The supplied clamp configuration for this STEMAids product is . A burette clamp and boss head should not be stated as included unless the current product specification confirms them.

What material is the STEMAids burette stand made from?

The exact base and support-rod materials are . Cast iron, steel or another material should not be claimed without manufacturer verification.

Can this stand hold a 50 mL burette?

Burette compatibility depends on the supplied clamp and support dimensions. Compatibility with a specific 50 mL burette is and should be checked before procurement.

Can a Laboratory Burette Stand be used in school and college labs?

Yes. Burette stands are suitable for supervised chemistry practicals involving titration, volumetric analysis and laboratory apparatus assembly.

Is the Laboratory Burette Stand ISO certified?

No dedicated product-specific ISO certification has been verified for this STEMAids stand. ISO 385 applies to laboratory burettes rather than the supporting stand.