Electric Bunsen Burner LAB 2

The StemAids Electric Bunsen Burner LAB 2 is a flameless laboratory heating device designed as an electric alternative to traditional gas Bunsen burners. It is suitable for laboratories where open flame, gas pipelines, or gas cartridges are not preferred. The LAB 2 supports controlled heating for test tubes, small vessels, crucibles, inoculating loops, glass tools, and routine science demonstrations.

Product Description

The StemAids Electric Bunsen Burner LAB 2 uses a hot-air column heating system to provide focused laboratory heating without a visible gas flame. It offers similar practical applications to a traditional Bunsen burner while reducing the need for butane, propane, or natural gas connections.

With a maximum temperature of 650°C and 500 W power, this electric burner is suitable for educational laboratories, microbiology labs, chemistry labs, biology labs, research laboratories, and training institutions. The integrated power regulator allows users to control heating intensity, while the insulated housing and cool-side design support safer bench-top operation during repeated laboratory use.

Product Specifications

Key Features

• Electric alternative to traditional gas Bunsen burners
• Maximum working temperature up to 650°C
• 500 W heating power for routine laboratory heating tasks
• Patented hot-air column system for focused heating
• No butane, propane, or natural gas connection required
• Integrated power regulator for heating control
• Cool sides and insulated housing for safer handling
• Protection against accidental liquid spillage
• Suitable for microbiology, chemistry, biology, and teaching laboratories

How to Use

1. Place the StemAids Electric Bunsen Burner LAB 2 on a clean, stable, dry, level, and heat-resistant laboratory bench.
2. Check the power cord, plug, housing, and heating area before operation.
3. Connect the burner to a suitable electrical power supply according to the laboratory electrical standard.
4. Switch on the unit and set the required heating level using the integrated power regulator.
5. Allow the burner to reach the required working temperature before starting the procedure.
6. Hold test tubes, inoculating loops, glass rods, or compatible tools using suitable holders, clamps, or forceps.
7. Position the item carefully in the heated air zone without touching the heating surface directly.
8. Monitor the sample or tool throughout the heating process.
9. After completion, switch off the burner and disconnect the power supply if required.
10. Allow the unit to cool completely before cleaning, moving, or storing.

Applications

• Flameless laboratory heating
• Alternative to gas Bunsen burner applications
• Heating test tubes and small laboratory vessels
• Sterilization support for compatible microbiology tools
• Glass tube softening and laboratory demonstrations
• Microbiology and biology practical training
• Chemistry laboratory heating demonstrations
• School, college, university, and research laboratory use

Safety and Handling Guidelines

• Use only on a dry, stable, level, and heat-resistant surface.
• Do not touch the heating zone during or immediately after operation.
• Keep paper, solvents, plastic items, loose clothing, and flammable materials away from the heated area.
• Use safety goggles, gloves, and suitable laboratory holders during heating procedures.
• Do not operate the burner if the cord, plug, housing, or heating section is damaged.
• Do not pour liquid directly into the heating area.
• Do not leave the electric burner unattended while switched on.
• Allow the unit to cool fully before cleaning, moving, or storage.
• Use only under trained supervision in educational laboratories.

FAQ

1. What is the StemAids Electric Bunsen Burner LAB 2 used for?

It is used for flameless laboratory heating, sterilization support, heating small vessels, glass tool heating, and science demonstrations where gas burners are not preferred.

2. Does the LAB 2 require gas?

No, the LAB 2 is an electric burner and does not require butane, propane, or natural gas.

3. What is the maximum temperature of the LAB 2?

The maximum temperature is 650°C.

4. What is the power rating?

The LAB 2 has a power rating of 500 W.

5. Can it replace a traditional Bunsen burner?

Yes, it can be used as an electric alternative for many routine Bunsen burner applications, especially where open flame or gas supply is not suitable.

6. Is it suitable for microbiology laboratories?

Yes, it can support microbiology workflows such as heating or sterilization support for compatible tools, provided the laboratory procedure allows electric burner use.

7. Does the housing remain cool during operation?

The sides are designed to stay cool even after extended operating periods, but users should still avoid touching the heating zone.

8. Is it protected against liquid spillage?

Yes, the LAB 2 design includes protection against accidental liquid spillage, but direct liquid exposure should still be avoided.

9. What are the dimensions of the unit?

The dimensions are approximately 149 × 168 × 192 mm.

10. How should the burner be cleaned?

After switching off and allowing the unit to cool completely, wipe the exterior with a clean dry or slightly damp cloth. Do not immerse the burner in water.

Why Choose StemAids?

StemAids laboratory equipment is designed for practical science workflows, safer apparatus handling, and dependable daily laboratory use. The StemAids Electric Bunsen Burner LAB 2 supports flameless heating, gas-free operation, controlled temperature performance, and efficient science training for schools, colleges, microbiology labs, chemistry labs, research laboratories, and institutional training environments.

SEO Keywords

StemAids Electric Bunsen Burner LAB 2, LAB 2 Electric Bunsen Burner, Flameless Bunsen Burner, Electric Laboratory Burner, Gas-Free Laboratory Burner, Electric Burner for Microbiology Lab, Electric Bunsen Burner 650°C, School Laboratory Electric Burner, Chemistry Lab Electric Burner, Educational Laboratory Heating Equipment